E61MA/MBED(EN).qx3 05.9.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 2 PRECAUTIONS ENGLISH ESPAÑOL WARRANTY GARANTIA For warranty information, contact your local Marantz distributor. Para obtener información acerca de la garantia póngase en contacto con su distribuidor Marantz. RETAIN YOUR PURCHASE RECEIPT GUARDE SU RECIBO DE COMPRA Your purchase receipt is your permanent record of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when corresponding with Marantz.
E61MA/MBED(EN).qx3 English – – – – – – – – – – – – 05.9.22 10:31 Page 3 – Zorg dat er tenminste 1 meter vrije ruimte boven het toestel is. – Zorg dat er 0,2 meter vrije ruimte rond het toestel is. – Mors nooit vloeistoffen over dit apparaat. Laat het apparaat nakijken door een gekwalificeerd servicemonteur wanneer er vloeistof in het apparaat is gemorst. – Plaats geen met vloeistof gevulde voorwerpen zoals vazen op het apparaat.
E61MA/MBED(EN).qx3 CAUTION : 05.9.22 10:31 Page 4 USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. WARNINGS FOR LASER RADIATION CAUTION : INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM. DANGER : INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. A NOTE ABOUT RECYCLING: This product’s packaging materials are recyclable and can be reused.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 5 The serial number of this product may be found on the back of the DVD player. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file. Date of Purchase Dealer Purchase from Dealer Address Dealer Phone No. Model No. Serial No.
E61MA/MBED(EN).qx3 05.9.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 7 ¡Progressive Scan system Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution than that of traditional 625i (576i) television signals. ¡Dolby Digital Sound By hooking this player up to a Multi-Channel Dolby Digital decoder, you can enjoy high-quality Dolby Digital 5.1 channel surround sound as heard in the movie theatres.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 8 FUNCTIONAL OVERVIEW FRONT PANEL 1 2 3 4 5 DVD PLAYER DV4610 STANDBY POWER ON/STANDBY A VIRTUAL FL OFF OPEN/CLOSE 32 33 14 31 13 11/12 9/10 15 REMOTE CONTROL OPEN/ CLOSE POWER 1 A 13 30 SEARCH MODE 16 1 2 3 4 5 6 7 8 9 0 +10 1. 2. 3. 4. 5. 6. A-B 17 18 19 7. 8. 9. REPEAT CLEAR RANDOM 20 10. SETUP TOP MENU 21 8 29 K 11. ENTER s B 6 22 23 24 12.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 9 FUNCTIONAL OVERVIEW English Tour of the Remote Control Buttons on remote control work in different ways for DVD, Video CD, Audio CD, MP3, JPEG, WMA and DivX®. Refer to the following table for correct use. DVD POWER Button VCD CD, MP3, JPEG, WMA DivX® • To turn on or to standby the unit. • To turn on or to standby the unit. • To turn on or to standby the unit. • To turn on or to standby the unit.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 10 FUNCTIONAL OVERVIEW Tour of the Remote Control DVD CLEAR Button · To clear the markers. · To clear the numbers entered incorrectly. · To cancel the A point for A-B Repeat. MENU Button VCD · To clear the markers. · To clear the numbers · To clear the markers. entered incorrectly. · To cancel the A point for A-B Repeat. entered incorrectly. · To cancel the A point for A-B Repeat. (CD) (CD) · To clear the numbers · To clear the numbers entered incorrectly.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 11 FUNCTIONAL OVERVIEW Lights up when the A-B Repeat function is on. Lights up when the repeat function is on. Lights up when the ALL Repeat function is on. Lights up when the progressive scan system is activated. P.SCAN DVD Lights up when the inserted disc comes to a pause. VCD Lights up when playing back in slow mode. (DVD, VCD) Lights up when the inserted disc is being played back.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 12 CONNECTIONS Description - Rear Panel 7 8 1 2 3 4 5 6 1. DIGITAL OUT Jacks Use either an optical or coaxial digital cable to connect to an AV amplifier. 2. 2CH AUDIO OUT Jacks Connect to the Audio input jacks of your TV or Stereo system. 3. VIDEO OUT Jack Use a video cable to connect the jack to the Video input jack of your TV or Stereo system. 4. COMPONENT VIDEO OUT Jacks Use these jacks if you have a TV with Component Video input jacks.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 13 The following show examples of connections commonly used to connect the DVD player to the TV and other components. If using this DVD player to play back a DVD in a Dolby Digital 5.1 channel surround or DTS surround format, the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks.
E61MA/MBED(EN).qx3 05.9.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 15 PLAYING A DISC Basic Playback VCD JPEG CD WMA • In setup menu, the FL OFF mode is not available. • The FL OFF mode will be released when you press the buttons listed below.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 16 PLAYING A DISC Step by Step Playback DVD-V DVD-RW Fast Forward / Reverse Search VCD DVD-V DVD-RW DivX ® 1 During playback, press the VCD F PAUSE button. CD WMA MP3 DivX® 1 During playback, press the FWD g or REV h • Playback will pause and sound will be muted. button repeatedly to select the required forward or reverse speed. 2 The disc advances by one frame each time the PAUSE button is pressed.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 17 3 Use the Cursor buttons (L / K / B / s) to move Track Search the zoomed picture across the screen. VCD CD MP3 JPEG WMA DivX® There are three ways to begin playback on a disc at a specific track. BY USING THE SEARCH MODE BUTTON 1 Press the SEARCH MODE __/ 15 button. • The Track Search display appears. 2 Within 30 seconds, select a desired track number using the Numeric buttons. • For the disc with less than 10 tracks, press the track number directly.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 18 PLAYING A DISC A-B REPEAT Repeat • The REPEAT button is available only during playback. DVD-V DVD-RW 1 Press the A-B REPEAT button REPEAT TITLE / CHAPTER at your chosen starting point. DVD-V To activate the Repeat function, press the REPEAT button during playback.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 19 • For more details of recording systems, refer to the instruction manual for the CD-R/CD-RW drive or the writing software. • For MP3 and WMA file recorded in Variable Bit Rate (VBR), the unit may not display the actual elapsed time. Random Playback This shuffles the playing order instead of playback in the original sequence. CD This player recommends the use of files recorded at the below specifications: 1 In stop mode, press the RANDOM RANDOM button.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 20 PLAYING A DISC Kodak Picture CD The DVD player can also run JPEG files stored on Kodak Picture CDs. The Picture CD is a service to convert photographs taken by a conventional film camera into digital data and write the data on a CD. The user can enjoy picture images on the television set by playing back the Picture CDs. For details of Kodak Picture CD, contact a shop that deals with developing service of Kodak Inc. 1 Press the MENU button.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 21 PLAYING A DISC On-Screen Information You can check information about the current media by pressing the DISPLAY button on the remote control. DVD-V DVD-RW 1 Press the DISPLAY button 2 Press the DISPLAY button again to show the cur- rent title. • The elapsed and remaining playing time of the current title will be displayed. 3 Press the DISPLAY button again to show the bit rate and the current repeat setting.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 22 PLAYING A DISC WMA 1 Press the DISPLAY button NOTES: • To erase all tracks in the programme at once, select ALL CLEAR at the bottom of the list at step 2 . • During the display of the PROGRAM screen, press the RETURN button, and the stop screen will show up with the programme contents in memory. • Press the STOP button once and then the PLAY button again. Playback will restart from the beginning of the track played previously. (Programme continued.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 23 PLAYING A DISC • If the disc has no audio language, ‘NOT AVAILABLE’ will be displayed. • For DVD-RW (VR mode), pressing the AUDIO button cycles the sound mode through MAIN, SUB and MAIN + SUB. • For DVD-RW (VR mode), discs recorded in double sound (two languages) can be played back in sound mode of MAIN, SUB or MAIN + SUB.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 24 PLAYING A DISC NOTES: • Opening the disc tray, turning off the power or selecting AC at step 2 and pressing the ENTER button will erase all markers. • To clear a marker, use the Cursor buttons (s or B), position the cursor on to the marker number to be cleared and press the CLEAR button. • You can mark up to 10 points. 3 Press the MODE or RETURN button to exit. NOTES: • You can also use the VIRTUAL button on the front panel.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 25 • If you select FIELD, pictures in the still mode will be stabilized although they will be coarse due to a little amount of data. • If you select FRAME, pictures in the still mode will be highly defined although they will be blurred due to output of two fields at the same time. DOLBY DIGITAL (Default : BITSTREAM) QUICK • Set to BITSTREAM when the player is connected to a Dolby Digital decoder.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 26 DVD SETUP SLIDE SHOW (Default : 5sec) 7 Press the SETUP button to exit. NOTE: • This adjusts the playback speed of the JPEG SLIDE SHOW. • Press the Cursor buttons (K or L) to select between 5 sec and 10 sec, then press the ENTER button. • This function may not work on some DVDs. Be sure if the ratings operate in the way you have set. To Change the Password: 1) Follow the steps 1 to 4 above.
E61MA/MBED(EN).qx3 05.9.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 28 TROUBLESHOOTING GUIDE If the DVD player does not perform properly when operated as instructed in this User Guide, check the player, consulting the following checklist. Problem Solution No power –Check if the AC power cord is properly connected. –Unplug the AC power cord, and wait for 5-10 seconds and then plug it in again. No sound or picture –Check if the TV is switched on. –Check the video connection. –Check the VIDEO/AUDIO cable connections to the TV.
05.9.
E61MA/MBED(EN).qx3 05.9.22 10:31 Page 30 www.marantz.com You can find your nearest authorized distributor or dealer on our website. U.S.A Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. EUROPE Marantz Europe B.V. P.O. Box 8744, 5605 LS Eindhoven, The Netherlands is a registered trademark.