User guide

32
ENGLISH
SETTING AND CLEARING TIMER PLAYBACK
1. Press the TIMER button @9 on the remote control twice.
"Timer Off" or "Timer On" appears on the display.
2. Switch from "Timer On" and "Timer Off" or vice versa using
the Cursor ( 1 / 2 ) buttons !1 on the remote control or the
Cursor ( 1 / 2 ) buttons . on the main unit.
Select "Timer On" to set timer playback.
Select "Timer Off" to clear timer playback.
3. Press the ENTER button @4 to enter the selection.
Important
Timer playback cannot be set if "No Disc", "Error Disc" or
"Blank Disc (CD-R(W))" is displayed.
INITIALIZE (RESET ALL)
Initialize the player to reset all the settings to the status when
the player is shipped from the factory.
1. Turn off the power of the player and unplug the power cord
from the power outlet.
2. Keep pressing the STANDBY button z on the main unit
and plug in the power cord to the outlet.
• All the settings of the player are reset and initialized.
Note:
The settings made in the setup menu of the player are not
reset.
IF YOU HAVE FORGOTTEN THE PASSWORD,
1. Turn off the power of the unit.
2. Turn on the power and open the tray.
3. Press the SETUP button !0 on the remote.
4. Enter “8800” with the numeric buttons u on the remote.
5. Press the SETUP button !0 again.
6. Press the S.TITLE button @0 next.
7. Press the STANDBY button z to turn off the unit once into
the stand-by mode.
8. Press the STANDBY button z again to turn on the unit. The
password and the parental lock level have been reset
(default status).
4. Set the playback ON minute using the Cursor ( 1 / 2 )
buttons !1 on the remote control or the Cursor ( 1 / 2 )
buttons . on the main unit.
5. Press the ENTER button @4 to enter the selection.
Or push the ENTER button ,.
On the display, "Off Time" appears first followed by the time,
and the hour flashes. (Playback OFF hour setting)
6. Next, set the playback OFF time as same as playback ON
time setting. Repeat steps 2 through 5 to set the hour and
minute.
After setting playback OFF time, "DVD/TUNER" appears on
the display and the DVD flashes. (Playback mode setting)
7. Set the playback mode using the Cursor ( 1 / 2 ) buttons !1
on the remote control or the Cursor ( 1 / 2 ) buttons . on
the main unit.
8. Press the ENTER button @4 to enter the selection.
Or push the ENTER button ,.
Upon completion of the settings, the timer setting mode is
cleared automatically.
• For timer play on a disc, you cannot determine a
chapter(track) to play. Playback starts form the beginning
of the disc.
• For timer play on tuner, the last station(frequency) you
tuned is played.
9. Press the / button ⁄5 on the main unit to extend the disc
tray, place the disc on the tray, and close the tray.
10. Set the STANDBY button z on the main unit to off.
Blink