User guide

20
ENGLISH
SELECTING PRESET CHANNEL
1. Press TUNER button w/n to select a radio band you want.
2. Press MODE button @6/⁄1 once to turn into preset mode. FL
Display shows like below.
3. Turn MULTI JOG dial ⁄4 on the player to select a preset
channel. Likewise, you can select a preset channel by
pressing 4 and ¢ buttons @8 on the remote.
• You can select a preset channel directly by pressing a
numeric button u on the remote.
4. Push MULTI JOG dial ⁄4 to confirm the selected preset
channel. For remote operation, press MEMO button @7.
5. Press TUNER button w/n to return to tuner mode.
SWITCHING RECEIVING MODE
When radio wave from a station is weak, the broadcast cannot
be received in stereo. If so, switch the receiving mode to
monaural. For AM radio, it is always in monaural regardless of
the receiving mode.
1. Press TUNER button w/n to turn into tuner mode.
2. Press MODE button @6/⁄1 twice. The player turns into
receiving mode and FL Display shows like below.
•“AUTO” indicator flashes to show the current receiving
mode.
3. Turn MULTI JOG dial ⁄4 on the player to select “MONO” to
set receiving mode to monaural mode. Likewise, you can
select with 4 and ¢ buttons @8 on the remote.
•“MONO” indicator flashes to show the current receiving
mode.
4. Push MULTI JOG dial ⁄4 to confirm the receiving mode.
5. Press TUNER button w/n to return to tuner mode.
Blink
Auto preset memory
This allows a band to be scanned automatically, a station with
good reception to be found and to be stored in the preset
memory.
1. Press TUNER button w/n to turn into tuner mode.
2. Press MEMO button @7/⁄2 more than 3 seconds. “M” mark
flashes on the FL Display.
• Auto preset begins.
• When a station is received, scanning pauses for 5
seconds.
3. Press the MULTI JOG dial ⁄4 to store the received station
within 5 seconds. The scanning restarts after pressing the
MULTI JOG dial ⁄4.
If the MULTI JOG dial ⁄4 is turned within 5 seconds, scanning
restarts and the frequency being received is not stored in the
memory.
This operation can be done with MEMO button @7 on the
remote.
4. When up to 30 stations have been preset, the auto preset
memory function automatically stops.
To stop in mid-operation, press the MEMO button @7/⁄2 for 3
seconds.
Note:
• If you operate the auto preset memory again, new received
frequency is stored into the preset memory 01 to 30. The
previous preset memories are replaced to new one.
• Preset Memory is not erased. Preset memory can be
replaced only.