User guide

ENGLISH

PRESET MEMORY OPERATION

The DV110 can store up to total 30 stations selected in the FM

and AM bands.

Manual preset memory

1. Tune to the station you want to preset.

See “To Listen to the Radio” above.

2. Press MEMO button @7/⁄2. “M” mark appears on FL Display.

•“M” mark flashes for about 5 seconds. The next step

(selecting a preset channel) must be done while it

flashes.

3. Select a preset channel by turning MULTI JOG dial ⁄4 on

the player within 5 seconds. Push MULTI JOG dial ⁄4 to

confirm the selected preset channel.

Likewise, you can select a preset channel by pressing

and

buttons @8 on the remote. To confirm the channel,

press MEMO button @7.

• The frequency of the radio station is stored in the presser

channel memory.

TUNER OPERATION

TO LISTEN TO THE RADIO

This player can receive FM and AM radio broadcast.

1. If TUNER button w/n is pressed, the player turns into tuner

mode and the FL Display changes like below.

2. Press TUNER button w/n again to select receiving band

you want.

• Each time TUNER button w/n is pressed, the band

switches from/to FM and AM.

↓ ↑

3. Turn MULTI JOG dial ⁄4 on the player to tune frequency.

Also you can tune with 5 and 6 buttons !4 on the remote.

• Tuning step is 100kHz for FM and 10kHz for AM.

• If MUTI JOG dial ⁄4 is turned fast, the tuner scans a

radio station frequency automatically. Also the auto scan

begins by pressing 5 or 6 button !4 on the remote for 3

seconds or more. (When auto scan begins, release the

button.) When a radio station is scanned, auto scan

stops.

4. Press 9o/x, 2@2/v, or ENTER @4/, button to return to

disc playback mode.

Blink