R Model DR6050 User Guide Compact Disc Recorder Recordable ReWritable
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
INPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 12. Grounding or Polarization — The precautions that should be taken so that the grounding or polarization means of an appliance is not defeated. 1.
CONTROLS AND CONNECTIONS Player front 27 26 25 24 23 22 CD RECORDER DR6050 Recordable ReWritable STANDBY POWER STORE/MENU EASY JOG CANCEL/DELETE ON/OFF STOP OPEN/ CLOSE PLAY/PAUSE REC OPEN/ CLOSE CDR STOP PLAY/PAUSE CD REC TYPE SOURCE ERASE DJ MODE PHONES FINALIZE PUSH ENTER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Player back ANALOG IN/OUT REMOTE CONTROL DIGITAL IN/OUT COAXIAL OPTICAL L IN R OUT AC IN INPUT 28 CDR/CD CD OUTPUT INPUT CDR/CD CD OUTPUT
ENGLISH TABLE OF CONTENTS CONTROLS AND CONNECTIONS ............... iii DISPLAY ....................................................... 20 Player front ........................................................... iii Player back .......................................................... iii Remote control ..................................................... iii Display ................................................................. iii General ...........................................................
Unpacking Congratulations on the acquisition of your CD-Recorder. This CD-Recorder now enables you to record, play and erase your own audio Compact Discs. Naturally the recorder can also be used to play all pre-recorded CDs. First check the contents of the packaging.
ENGLISH INTRODUCTION • Do not use conventional record cleaner for analog records, as this will adversely affect the disc surface. Store discs properly by placing them in their disc cases. • Do not attach a piece of paper or sticker on the label side of disc. When a disc has a piece of plastic tape or rental CD label with paste protruded from the edge or when a disc has a trace of such a sticky object, do not attempt to play the disc.
Controls on the front CD-Recorder (31) DIGITAL INPUT ............. connects to the digital coaxial output of an external CD player (32) DIGITAL OUTPUT CDR / CD .... connects to the digital coaxial input of e.g. amplifier or recording device (33) DIGITAL OUTPUT CD ... connects CD player deck to the digital coaxial input of e.g. amplifier or recording device (34) OPTICAL INPUT ............ connects to the digital optical output of an external CD player (35) OPTICAL OUTPUT CDR / CD ...
ENGLISH (65) SYNC ............................. automatic or synchronized start of external recording (66) ........................ digital input I selected for external recording REMOTE CONTROL Remote control commands (67) STANDBY ................. switches to Standby/On/Off (68) TRACK INCR. (ement) .. increases track numbers during recording (69) SCAN ............................. plays the first 10 seconds of each track (70) REPEAT .........................
This CD-Recorder can be used to record directly or through a (pre-) amplifier from any digital or analog audio source. In addition, the appliance can be used as a regular CD player. Read how to connect the CD-Recorder based on the possibilities your other audio equipment offers. Please refer to the operating instructions for your other audio equipment first.
ENGLISH INSTALLATION D-BUS CONNECTION Digital Optical connections Remote control cable connections For recording and playing, connect (using the suitable fiber-optic cable, available from your supplier) the CD-Recorder to a digital amplifier or other equipments based on the diagram below. Before connection the cables, remove the dust caps from the digital optical connections. We recommend that you save the caps.
The numbers between parentheses refer to the fold-out. Switching ON and OFF 1 Inserting discs Connect the power cord into the mains. AC IN q 2 1 Press / OPEN/CLOSE to open the disc tray. ➔ lights up. 2 Insert a CD, CD-R or CD-RW in the appropriate recess in the tray, label side up. 3 Press / OPEN/CLOSE to close the tray. ➔ lights up, followed by and the display will show the type of disc you inserted. Press the POWER ON/OFF (1) button on the front of the CD-Recorder to turn it on or off.
ENGLISH RECORDING The numbers between parentheses refer to the fold-out. Remarks about recording Recording modes You will soon discover how easy it is to make your own CDs. Nevertheless, it is advisable to use a CD-RW disc for your first try. We will describe: - Digital recording (fast or normal recording). - Your recorder offers several recording modes.
The numbers between parentheses refer to the fold-out. SCAN w REPEAT PROG.
ENGLISH RECORDING (FROM INTERNAL CD-DECK) The numbers between parentheses refer to the fold-out. SCAN w REPEAT PROG.
ENGLISH RECORDING (FROM EXTERNAL SOURCE) The numbers between parentheses refer to the fold-out.
ENGLISH RECORDING (FROM EXTERNAL SOURCE) The numbers between parentheses refer to the fold-out.
ENGLISH FINALIZING/UNFINALIZING The numbers between parentheses refer to the fold-out.
ENGLISH ERASING The numbers between parentheses refer to the fold-out.
ENGLISH PLAYING The numbers between parentheses refer to the fold-out.
ENGLISH PLAYING The numbers between parentheses refer to the fold-out.
The numbers between parentheses refer to the fold-out. Programmed play Programming for recording • You can program up to 99 tracks to play in any desired sequence. • Tracks can be programmed more than once. • A program for playback can be made from both the disc in the recorder and the disc in the player. A program for recording can only be made from the disc in the player (CD deck). q Press REC TYPE (11) to select the required recording mode (see ‘RECORDING’).
ENGLISH MENU MODE The numbers between parentheses refer to the fold-out. EX: Storing names of Text settings u ABC DEF GHI 1 2 3 JKL MN OPQ 4 5 6 RST UVW 7 8 DISPLAY SPACE XYZ 9 SCROLL 0 CD RECORDER DR6050 FUNCTION Recordable ReWritable STANDBY POWER CD CDR STORE/MENU EASY JOG CANCEL/DELETE ON/OFF STOP REC OPEN/ CLOSE PLAY/PAUSE OPEN/ CLOSE CDR STOP PLAY/PAUSE CD REC TYPE SOURCE ERASE DJ MODE PHONES FINALIZE PUSH ENTER y i wo Text setting .................
ENGLISH MENU MODE The numbers between parentheses refer to the fold-out. Text Memory Review/Erase Text Memory Auto track increment q In Stop mode, select CDR (7). The input text data of the disc is once saved in the text memory until finalizing the disc. When the text memory is full, will appear on the display and unable to add more text data.
ENGLISH DISPLAY Messages, as listed and explained here, may appear on the display for your guidance. ........... to start manual recording, finalizing or erasing ........... to start synchronised recording from a source General ......................... reading disc information .................. when trying to record on a finalized CD-R(W) or a prerecorded CD ................................. during tray opening ................. when trying to record on a ...............................
OTHER INFORMATIONS Menu messages Fixing problems ...................... when attempting to edit text for a disc which has no tracks If you think your CD-Recorder is defective, it is wise to read this list first. Maybe you forgot a simple step. ................... when entering Text Edit mode Warning! .................... when editing or erasing an artist name Under no circumstances should you attempt to repair the CD-recorder yourself as this will invalidate the guarantee. ......................
ENGLISH OTHER INFORMATIONS Player does not react • use the POWER ON/OFF (1) button on the front of the Player to switch it off and back on • a power failure has occurred during recording the CDRecorder is attempting to repair the disc If then appears on the display, the disc cannot be recorded further, and cannot be finalised. But it can still be played on the CD-Recorder or another CDRecorder.
ENGLISH ABOUT TEXT The input text data is saved in the text memory until the disc is finalized. Therefore, the data is not written in the CD-R(W) disc before finalizing the disc. JAZZ JAZZ 2 SSIC S POP CLA 2 CLASSIC POPS Finalizing the disc transfers the text data from the text memory to the disc. IC A CL SS POPS JAZZ 2 JAZZ 2 Unfinalizing the disc transfers the text data from the disc to the text memory.
ENGLISH TECHNICAL SPECIFICATIONS GENERAL System .................................................................................................. Compact disc digital audio Number of channels ............................................................................... 2 (stereo) Applicable discs ..................................................................................... CD, CD-R (digital audio), CD-RW (digital audio) Power Requirement ..........................................................
COUNTRY ALGERIE ARMENIA AUSTRALIA AUSTRIA BAHREIN BANGLADESH BELGIUM BULGARIA CANADA CHINA CYPRUS CZECH REPUBLIC DENMARK DUBAI EGYPT ESTONIA F.Y.R.O.M. FINLAND FRANCE GERMANY GREECE HEADQUARTERS EUROPE: HONG KONG HUNGARY ICELAND INDIA IRAN IRELAND ISRAEL ITALY IVORY COAST JAPAN KOREA KUWAIT LATVIA LEBANON LITHUANIA MALAYSIA MALTA MAURITIUS MILITARY MARKET EUROPE NETHERLANDS NEW ZEALAND NORWAY OMAN POLAND PORTUGAL PROFESSIONAL EUROPE PROFESSIONAL U.S.A.
