R Model CC4300 User Guide 5 Disc CD Changer
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3.
16.Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 17.Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
Contents General Information ..................................................................................................................2 English Unpacking ...............................................................................................................................................................2 For Your Safety.......................................................................................................................................................2 Compact Discs......
General Information English Unpacking Compact Discs First check the contents of the packaging. It should contain the following: The glossy side shining like a rainbow is the front side of the disc, and the side on which the label is printed is the back. Unlike conventional turntables for playing analog discs, the CC4300 reads the information recorded on the disc from underneath without contacting it using a beam of laser light.
General Information This unit can play back the CD-RW (ReWritable) discs as well as ordinary music CD and CD-R (Recordable) discs. • The CD-R and CD-RW discs should contain properly-recorded TOC information so that they can be played back. With the CD recorder system, writing the TOC information in a disc is referred to as finalizing the disc. A disc cannot be recognized as a CD disc and played back unless it has been finalized properly.
Functional Overview Front Panel Controls English 1 2 3 4 5 6 OPEN/CLOSE 5DISC CD CHANGER CC4300 1 2 3 4 5 DISC SKIP DISC CHANGER STANDBY EDIT POWER ON/STANDBY T.SIZE PROGRAM 7 DELETE RANDOM INTRO 1 2 3 4 PROG AUTO DELETE EDIT A 10 INDEX STEP 5 13 12 q POWER ON/STANDBY button Press this switch to turn the power on and press again to turn to stand by. w STANDBY indicator Lights up red when the CD player is in Stand-by mode. e Disc tray Load a compact disc on the disc tray.
Functional Overview !8 § (Forward skip/Search) button English • Press this button to play from the beginning of a next track. • Press and hold down this button to search for a specific passage in fast forward. !9 2 / ; (Play/Pause) button • Press this button to start playing in the stop or pause mode. • Press this button to interrupt play temporarily and press again to restart play. @0 PHONES jack Stereo headphones can be plugged into this jack for private listening.
Functional Overview Rear Panel Controls English 1 2 RS232C REMOTE CONTROL SELECTOR DIGITAL OUT COAX. ANALOG OUT REMOTE CONTROL L IN R OUT OPTICAL EXT. INT. 4 5 6 3 z ANALOG output jacks Connect these jacks to the CD(or AUX) input jacks of your amplifier or receiver. x RS232C The RS232C port is to be used in conjunction with an external controller to control the operation of the CD player by using an external device. (See also page 26.
Functional Overview DISC POWER 1 2 3 4 5 6 7 8 9 A-B 13 3 DELETE PROGRAM INTRO 5 Press this button to change the brightness of the display. 0 15 16 17 18 6 7 EDIT 19 T.SIZE DIMMER TIME 8 9 10 REMOTE CONTROL UNIT RC4300CC 20 !1 DIMMER button 4 RANDOM 14 Press this button to display the elapsed or remaining playing time of the current track or remaining playing time of the disc. 2 REPEAT Press and hold down this button to search for a specific passage in fast forward.
Functional Overview ❖ Operation of Remote Control Unit English 1. Remote control The distance between the transmitter of the remote control unit and the IR SENSOR of the CC4300 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control may not be possible. 2. Loading batteries The life of the batteries used with the remote control unit is about 6 months with normal use.
Connections • Do not plug the AC input cord into the AC outlet when plugging and unplugging connection cords. • Be sure to connect the white plugs to the L(Left) and the red plugs to the R(Right) jacks when making connections with the supplied cords. • Plug the optical digital cable in securely, as far as it will go. • Refer to the connecting diagram in the operating instructions of AMPLIFIER/RECEIVER. Connecting other Audio Equipment CC4300 RS232C REMOTE CONTROL SELECTOR DIGITAL OUT COAX.
Connections Connecting the Remote Control English CC4300 RS232C REMOTE CONTROL SELECTOR DIGITAL OUT COAX. OPTICAL ANALOG OUT REMOTE CONTROL L IN R OUT EXT. INT. EXT. INT.
Playing CDs 1. Press the POWER ON/STANDBY button on the unit or the POWER button on the remote control to turn on the power. 4 To interrupt play temporarily, press Play/Pause button on the unit again or the Pause button on the remote control. 7 8 PROGRAM 9 DELETE INTRO DIMMER TIME 0 or STANDBY POWER ON/STANDBY or DISC POWER EDIT T.SIZE REPEAT 1 2 3 4 5 6 A-B • " ; " indicator lights up.
Operations Changing Discs during Play English 1. Press the OPEN/CLOSE button on the unit to open the disc tray. OPEN/CLOSE 2. Change the desired discs. Skip and Search Play ❖ Selecting a Disc • Press the corresponding Disc selector button on the unit to start play from the desired disc. • Press DISC button on the remote control first and then the desired disc number(1~5) on the NUMERIC buttons within 2 seconds. (Example) When selecting the disc 3.
Operations Playing the First 10 Seconds of Each Track (Introscan Play) ❖ 1 Disc Random Play ❖ 1 Disc Introscan Play • Press RANDOM button on the unit or the RANDOM button on the remote control to play tracks in random sequence. RANDOM English Playing Tracks in Random Sequence (Random Play) 1 2 3 4 5 6 • Press INTRO button on the unit or the INTRO button on the remote control to play the first 10 seconds of each track.
Operations Repeat Play English ❖ Repeating a Single Track during Play • Press REPEAT button on the unit or the REPEAT button on the remote control after selecting the desired track. REPEAT DISC Playing Tracks in Any Sequence (Programmed Play) Note : • Up to 32 selections can be programmed to play in any desired sequence. • The track number greater than 99 can not be memorized. POWER REPEAT 1 2 3 4 5 6 or ❖ Programming the Tracks on the CDs A-B RANDOM 7 8 9 PROGRAM DELETE INTRO 1.
3. Select the desired track. Press ∞ / § buttons on the unit or the ∞ / § button or the NUMERIC buttons on the remote control. (Example) When selecting the track 4. 6. Start the programmed play. Press Play/Pause button on the unit or the Play button on the remote control. 7 8 PROGRAM 9 DELETE INTRO DIMMER TIME 0 or REPEAT 1 2 3 A-B or EDIT T.SIZE DIMMER or TIME 4 5 6 7 8 9 EDIT PROGRAM DELETE INTRO 0 REMOTE CONTROL UNIT RC4300CC PROG 4 TRACK 1 2 3 4 5 4.
Operations ❖ Rectifying Any Wrong Programmed Selection English (Example) When the track 3, 5 and 7 of the disc 1 are programmed and you want to store the track 7 of the disc 3 instead of the track 5 of the disc 1. 3. Select the track 7. Press ∞ / § buttons on the unit or the ∞ / § button or the NUMERIC buttons on the remote control. A-B 4 5 6 RANDOM 7 or 1. Find the track 5 of the disc 1 in program checking by press PROGRAM button on the unit or the PROGRAM button on the remote control. EDIT T.
❖ Clearing the Programmed Selections - To Clear One by One • Each time Stop/Clear button on the unit or the Stop/Clear button on the remote control is pressed in the program mode, the programmed selections are cleared one by one in the opposite sequence. - To Clear All Programmed Selections • Press Stop/Clear button on the unit or the Stop/Clear button on the remote control for more than 4 seconds in the program mode.
Operations Editing for Recording AUTO EDIT English 1 Note : • Up to 30 tracks for auto edit or 32 tracks for manual edit can be edited according to the tape length. • It is possible only on the current disc. • Use Disc selector or DISC SKIP buttons before entering edit mode. ❖ Setting Up Auto Edit 1. In the stop mode, select the auto edit mode. Press EDIT button on the unit or the EDIT button on the remote control.
Operations 1. In the stop mode, select the manual edit mode. Press EDIT button twice on the unit or EDIT button twice on the remote control. 5. Press EDIT button on the unit or the EDIT button on the remote control to start editing for the side B. English ❖ Setting Up Manual Edit EDIT EDIT EDIT T.SIZE DIMMER TIME or REMOTE CONTROL UNIT RC4300CC EDIT T.SIZE DIMMER TIME or REMOTE CONTROL UNIT RC4300CC PROG EDIT TRACK B 1 1 2 4 5 7 8 10 11 13 14 EDIT 1 2 3 4 5 2 3 4 5 3 6 9 12 2.
Operations ❖ Checking the Edited Tracks ❖ Start Edit Recording English • In the edit mode, check as you do the programmed tracks. (refer to “Checking the Programmed Selections” on page 15) Before start editing, connect remote control input of Marantz cassette deck with remote control output of CC4300 by remote control cable. PROGRAM RANDOM 7 8 PROGRAM 9 DELETE INTRO 0 or EDIT T.
- Synchro recording with Marantz one-way cassette deck, or Marantz auto reverse cassette deck set to one side (O) mode. - Recording with Marantz cassette deck without remote cable connection, and recording with the cassette deck other than Marantz. 1. After setting up Edit program automatically or manually, setup the cassette deck to rec pause state. 1. After setting up Edit program automatically or manually, start recording of cassette deck first. 2.
Operations Deleted Play English When there are the undesired discs or tracks, you can delete up to 32 selections. ❖ Deleting the Undesired Discs or Tracks 3. Select the undesired track. Press ∞ / § buttons on the unit or the ∞ / § button or the NUMERIC buttons on the remote control. (Example) When selecting the track 4. REPEAT 1. In the stop mode, enter the delete mode. Press DELETE button on the unit or the DELETE button on the remote control. 1 2 3 4 5 6 A-B or EDIT T.
Operations English 5. When deleting other tracks on that disc within 8 seconds after the above step 4, repeat the above steps 3 and 4 and when deleting the tracks on other discs, repeat the above steps 2, 3 and 4. 6. Start the deleted play. Press Play/Pause button on the unit or the Play button on the remote control. 7 8 PROGRAM 9 DELETE INTRO DIMMER TIME 0 or EDIT T.
Operations ❖ Recovering the Deleted Selections English - To Recover One by One • Each time Stop/Clear button on the unit or the Stop/Clear button on the remote control is pressed in the delete mode, the deleted selections are recovered one by one in the opposite sequence. - To Recover All Deleted Selections • Press Stop/Clear button on the unit or the Stop/Clear button on the remote control for more than 4 seconds in the delete mode.
Operations Using the Headphones • Each time TIME button is pressed during play, time display changes as follows: TIME • For private listening, insert a plug of the headphone into “PHONES” jack. PHONES EDIT T.SIZE DIMMER TIME or REMOTE CONTROL UNIT RC4300CC Elapsed playing time of the current track.
Operations English External Control (Serial Interface) RS232C The unit can receive external control signals by connecting a straight cable on the market to the D-sub 9 pin connector for RS232C external control. ❖ Data Packet A packet contains data from 5 to 8 bytes in length. In serial communication, ASCII code from 00h to 7fh is used. So the HEX data are converted into ASCII code and set to the data packet. The data packet includes CR code (0dh) at the end.
• Remote Control Unit (RC4300CC) RC-5 Code The unit can be controlled through its infrared IR sensor on the front panel when it receives remote control signals that supports RC-5 signals as shown in the table on the following. These remote control (RC-5) codes can also be used if sent through the RS232C port found on the rear panel of the unit. Key No.
Troubleshooting If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or our service organization. English Problem Possible Cause No power • The AC input cord is disconnected. • The POWER switch is not pressed correctly. • Connect the cord securely. • Press the POWER button to ON. No play • The disc is loaded upside down. • Reload the disc with the printed side up. • Clean the disc. • Load another disc.
Specifications TYPICAL AUDIO PERFORMANCES Number of channels ................................................................................................................................................ 2 Frequency response ............................................................................................................ 20~20,000 Hz ±0.5 dB Signal to noise ratio, A Wtd. ..........................................................................................................................
COUNTRY ALGERIE ARMENIA AUSTRALIA AUSTRIA BAHREIN BANGLADESH BELGIUM BULGARIA CANADA CHINA CYPRUS CZECH REPUBLIC DENMARK DUBAI EGYPT ESTONIA F.Y.R.O.M. FINLAND FRANCE GERMANY GREECE HEADQUARTERS EUROPE: HONG KONG HUNGARY ICELAND INDIA IRAN IRELAND ISRAEL ITALY IVORY COAST JAPAN KOREA KUWAIT LATVIA LEBANON LITHUANIA MALAYSIA MALTA MAURITIUS MILITARY MARKET EUROPE NEW ZEALAND NORWAY OMAN POLAND PORTUGAL PROFESSIONAL EUROPE PROFESSIONAL U.S.A.
