R Model CC3000/CC4000/CC4000 OSE User Guide 5 Disc CD Changer Downloaded From Disc-Player.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations. Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le matérier brouilleur du Canada. Downloaded From Disc-Player.com Marantz Manuals NOTE : Changes or modifications may cause this unit to fail to comply with Part 15 of the FCC Rules and may void the user’s authority to operate the equipment. English . . . . . . . . . . . . . . . . . . . .
SAFETY INSTRUCTIONS – Read before operating equipment English This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. Retain Instructions - The safety and operating instructions should be retained for future reference. 3.
Note to the Cable TV system installer This reminder is provided to call the Cable TV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
English CONTENTS INTRODUCTION Introduction . . . . . . . . . . . . . . . . . . . . . . .6 Thank you for selecting the Marantz CC 3000 & CC4000 & CC4000 OSE Compact Disc Changer.
English INSTALLATION COAXIAL R L IN OUT DIGITAL OUTPUT ANALOG OUT REMOTE CONTROL 1 2 3 Connections 1 Digital Out This output supplies digital signal and can therefore only be connected to an input which is suitable for this signal. Use here a lead with one cinch plug on either end. Never connect this socket to a non-digital input of an amplifier, such as AUX, CD, TAPE, PHONO etc! 2 Analog Out For the connecting cable to the amplifier.
FUNCTIONAL OVERVIEW English 2 3 4 5 67 8 9 0 ! @ # $ % STOP/CP PLAY/REPLAY % – – – 5 DISC CD CHANGER PAUSE PROGRAM SCAN REPEAT EDIT TIME P.SEARCH/F TRACK 4 3 PEAK TOT REM TRACK TIME ; ) 9 5 2 ^ 1 SHUFFLE PROGRAM DISC SHUFFLE VIDEO CD 1+G PAUSE REPEAT 1 DISC 1 2 POWER ON/OFF 3 4 5 & * OPEN/CLOSE ? CD REWRITABLE PLAYBACK PHONES/ LEVEL ( 1 ( * 1 POWER-ON/ OFF Switching on and off. 2 EDIT Activating the EDIT function when making a recording.
Remote Control PAUSE ; Interrupting play. 2 SCAN Automatically playing the beginning of each track. 3 PROG. Opening the memory when compiling a program. 4 DISC – Selecting another CD during play. – Selecting a CD to start play with. – Selecting CDs when compiling a Program, Peak Search or Edit. 5 TRAY OPEN / Opening and closing the CD compartment. 6 SHUFFLE Playing in random order. 7 0-9 DIGIT KEYS – Selecting another track. – Selecting a track to start play with.
FUNCTIONAL OVERVIEW English Display { – Lights up when the changer receives a command from the remote control. 1 - 5 CD number indicator 4 3 5 2 1 – Lights up when you switch the changer on. – Indicates the number of CDs in the CD compartment. – Indicates what CD is being played (CD number flashes). PROGRAM – Flashes when a program is being compiled. – Lights up when a program is being played. TRACK – Indicates: – what track is being played; – the number of tracks on a CD or in a program.
Inserting the CDs NOTE! Use only audio CD; audio CD-R or audio CD-RW. • Press POWER-ON/OFF to switch the changer on. – The changer will now start CD detection to check how many CDs there are in the CD compartment. The turntable will rotate slowly until all positions (1 - 5) in the CD compartment have been checked. – The position which is being checked is always shown on the display ( ). – After CD detection the 1 - 5 CD number indicator will show the number of CDs in the CD compartment.
PLAYBACK English Selecting Another Track During Play (S T) • Press T or S (less than 0.5 seconds) until the desired track number appears under TRACK. – The music stops and a moment later the selected track begins to play. lights up when you select a nonexistent track number. Selecting Another CD During Play (CD DIRECT PLAY) • Key in the desired CD number. – The music stops and a moment later the selected CD begins to play. lights up when there is no CD in the selected CD compartment.
Playing In Random Order (SHUFFLE) All CDs: • Press SHUFFLE before or during play. – If the CD compartment was open, it will now close. – SHUFFLE lights up and all the tracks are now played in a random order. – If you press T, you will select any one of the following tracks. • Press SHUFFLE again if you wish to return to normal play. NOTE! – If, during play, you open the CD compartment to change CDs (see 'NORMAL PLAYBACK') then playback in random order will be cancelled.
PLAYBACK English Note: – Repeating of a CD is not possible during shuffle or program mode. Repeating all CDs: • Press REPEAT three times before or during playback. – REPEAT lights up; all CDs will now be repeated continuously. • Press REPEAT again to stop the CDs being repeated. NOTE! – When a program has been stored (for one or more CDs), then only the program will be repeated. Searching For The Loudest Passage (PEAK SEARCH) • In STOP mode, press PEAK SEARCH. – lights up and PEAK starts flashing.
Activating The Fade-In And Fade-Out Function (FADER) NOTE! – The FADER function can be used if the changer is connected to the amplifier or the system via the ANALOG OUT output. • During play press FADER. – The sound level will now gradually decrease (FADE OUT), after which the changer will go into the PAUSE mode. FAdE f ≠ ™ FAdE ≠ ™ FAdE _ • Press FADER again. – Play continues and the sound level will increase again to the originally set level (FADE IN).
EDIT English The EDIT function has two recording modes in which you can store the recording time in the changer memory. • Press EDIT to activate the EDIT mode. – appears on the display. EDIT NORMAL – The changer will determine which tracks fit on each side of the tape and will stop after the last track. The tracks will be recorded in the order in which they appear on the CD(s). EDIT OPTIMAL – The changer now calculates the combination of tracks that will optimize the use of available recording time.
ADDITIONAL INFORMATION • Press PLAY 2. – The remaining tracks will now be played. – After the last track play will stop; lights up. NOTE! – As soon as you press PLAY 2 the other changer functions will temporarily be switched off to prevent the recording being interfered with; EDIT ACTIVE lights up if you press one of the other buttons during recording. – You can quit the EDIT mode by pressing STOP 9. or OPEN/CLOSE ; EDIT CANCELLED then lights up.
ADDITIONAL INFORMATION English Technical Data Typical Audio Performance Frequency range: . . . . . . . . . . . . . . . . . . .20 Hz - 20 kHz Amplitude non-linearity: . . . . . . . ≤ 3 dB (1 kHz, -90 dB) Dynamic range: . . . . . . . . . . . . . . . . . . . .>90 dB (1 kHz) Signal-to-noise ratio: . . . . . . . . . . . . . . . .>95 dB (1 kHz) Channel separation: . . . . . . . . . . . . . . . . .>95 dB (1 kHz) Channel unbalance . . . . . . . . . . . . . . . . . .≤ 1 dB (1 kHz) Total harmonic distortion: . . . .
English 19 Downloaded From Disc-Player.
English 20 Downloaded From Disc-Player.
Marantz America, Inc. 440 Medinah Road Roselle, IL 60172-2330 Phone : (708) 307-3100 Fax : (708) 307-2687 R 3139 116 18841 Downloaded From Disc-Player.com Marantz Manuals is a registered trademark.
