User Manual

Page 85 1010-1023, Rev 00
5.4.1 PCH-IO Configuration
Use the PCH-IO Configuration menu (631HBIOS Menu 15) to configure the PCH IO settings.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Chipset
Auto Power Button Function [Disabled]
Restore AC Power Loss [Last State]
> PCH Azalia Configuration
Power Saving Function(ERP) [Disabled]
Select AC power state when
power is re-applied after
a power failure. When Auto
Power Button Function
select Enabled the AC power
loss will always power on.
---------------------
 : Select Screen
 : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 15: PCH-IO Configuration
 Restore AC Power Loss [Last State]
Use the Restore AC Power Loss BIOS option to specify what state the system returns to
if there is a sudden loss of power to the system.

Power Off
The system remains turned off

Power On
The system turns on

Last State
DEFAULT
The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.
 Power Saving Function(ERP) [Disabled]
Use the Power Saving Function(ERP) option to enable or disable the power saving
function.