User Manual

1010-1023, Rev 00 Page 56
Step 7: Push the new DIMM module until it engages and the white plastic end clips click
into place. Make sure the end clips are fully secured after installation.Step 0:
4.5 Elevated Platform Removal
The elevated platform supports the optical drive and the hard drive. It is not necessary to
remove the hard drive bracket to remove the elevated platform.
Step 1: Unfasten the elevated platform screws on the top panel (602HFigure 4-3).
Figure 4-3: PC415C Top Panel Elevated Platform Screws
Step 2: Unfasten the elevated platform screws on the side panel (603HFigure 4-4).
Figure 4-4: PC415C Side Panel Elevated Platform Screws
Step 3: Unfasten the elevated platform screws on the bottom panel (604H Figure 4-5).
Figure 4-5: PC415C Bottom Panel Elevated Platform Screws