User Manual

Page 55 1010-1023, Rev 00
Figure 4-1: SO-DIMM Module Locations
Step 3: Release the SO-DIMM module by pulling both the spring retainer clips outward
from the socket.
Step 4: Grasp the SO-DIMM module by the edges and carefully pull it out of the socket.
Step 5: Install the new SO-DIMM module by pushing it into the socket at an angle
(Figure 4-2).
Step 6: Gently push the rear of the SO-DIMM module down (Figure 4-2). The spring
retainer clips clip into place and secure the SO-DIMM module in the socket.
Figure 4-2: SO-DIMM Module Installation