User Manual

1010-1023, Rev 00 Page 54
WARNING!
Please take antistatic precautions when working with the internal
components. The interior of the PC400C Series Panel PC contains
very sensitive electronic components. These components are easily
damaged by electrostatic discharge (ESD). Before working with the
internal components, make sure all anti-static precautions described
earlier have been observed.
To access the panel PC internal components, the back cover must be removed. To
remove the back cover, please refer to Section 599H3.5 for back cover removal instructions.
4.4 SO-DIMM Replacement
Please read the warnings at the beginning of the previous section before attempting to
access any PC400C Series Panel PC internal components.
To install/replace the SO-DIMM modules, please follow the steps below.
Step 1: Remove the back cover (Section 600H3.5).
Step 2: Locate the SO-DIMM module on the motherboard.