User Manual

Page 49 1010-1023, Rev 00
Pin
Description
Pin
Description
7
GND
8
GND
9
5V
10
GND
11
NC
12
DDCDAT
13
HSYNC
14
VSYNC
15
DDCCLK
Table 3-11: VGA Connector Pinouts
To connect the PC400C Series Panel PC to a second display, follow the steps below:
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in 598HFigure 1-4 and Figure 1-5.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector. Once the connectors are properly aligned, insert the
male connector from the VGA screen into the female connector on the PC400C
Series Panel PC. See 599HFigure 3-31.
Figure 3-31: VGA Connector