User Manual

Page 47 1010-1023, Rev 00
3.12.6 USB 2.0 Connectors
The USB 2.0 ports are for attaching USB 2.0/1.1 peripheral devices to the system. The
pinouts of the USB 2.0 port are shown below:
Pin
Description
1
VCC
2
DATA-
3
DATA+
4
GROUND
Table 3-9: USB 2.0 Port Pinouts
To connect a USB 2.0 or USB 1.1 device, please follow the instructions below:
Step 1: Located the USB connectors. The locations of the USB connectors are shown
in Chapter 1.
Step 2: Align the connectors. Align the USB device connector with one of the
connectors on the bottom panel. See Figure 3-29.
Figure 3-29: USB Device Connection