User Manual

80 MAPware-7000 Programming Manual
1010-1040, Rev. 02
 
 Under Tag Name, enter a name that you want to use for the coil (ex: ON BIT).
 In the Register/Coil Type field, use the pull-down menu to select Internal Coils.
 Under Tag Type, make sure you check the Coil or Bit Addressed Register radio button.
 
 Click the Add button to add this tag to the database.
 
going to use to copy the contents of the Allen Bradley tag register.
 Under Tag Name, enter a name that you want to use for the register (ex: Copy of
N7:50).
 In the Register/Coil Type field, use the pull-down menu to select Data Registers.
 Under Tag Type, make sure you check the Register radio button.
 
 Click the Add button to add this tag to the database.
 
area.