User Manual

326 MAPware-7000 Programming Manual
1010-1040, Rev. 02
Press the FHWT button on the MODE SELECTION MENU to enter the Factory Hardware Test
Mode (FHWT) main screen:
 Serial No.- this is the serial number assigned to the HMC
 LCD button  executes the LCD display color test. When pressed, the following screen is
displayed:
Verify that the proper colors are displayed and there are no missing pixels. Press the
black square in the lower left corner to return to the FHWT menu.
 SRAM button  executes a non-destructive SRAM memory test when pressed:
The HMC automatically returns to the FHWT menu after the test.
 Function Keys button  executes a function key test:

Continue in this fashion until all keys have been tested.