User Manual

MAPware-7000 Programming Manual 273
1010-1040, Rev. 02
 Application Memory  this is the memory used for screens, global tasks, alarms, and
tags.
 Data Logger Memory  indicates how much memory has been allocated for the data
logger feature.
 Ladder Logic Memory  shows how much memory has been consumed for the ladder
logic diagrams.

Keep Memory Area
The Keep Memory Area feature provides the ability to retain values in designated internal

menu bar:
To enable, click the Enable/Disable checkbox next to the memory that you wish to use (BW, T, C,
or D). Enter the number of registers (starting with 0) that you want as retentive memory. The
maximum memory area is 100 (ex D0-D99) registers. Note: to use these registers, you must
initialize them in the Tag Database.
When you download your project into the HMC7000 unit, there are two options listed in the
Download to Device window of MAPware-7000 in the Device Settings section: