User Manual

160 MAPware-7000 Programming Manual
1010-1040, Rev. 02
Add Tag B to Tag A Properties Options
 Language (List J)  highlight the language that must be selected to display the entered
text
 Appearance Feedback Tag On/Off (List L)  select the On and/or Off labels
 Button Style (List M)  
 Feedback Tag (List N)  enable this feature and select the same tag for both the target
address and the feedback tag address, if you wish to see the button change state (i.e. go

 Simulation (List Nc)  

 Tag A/B (List R)  the two target addresses used to add values
 Task (List O)  add Tag A to Tag B (cannot be modified)
 Design (List S)  identifies object
 Layout (List T)  coordinates (i.e. size and position) for the object
Resize an Add Tag A to Tag B button object
Move the mouse pointer over one of the resize handles. When the pointer changes to a double-
headed arrow, simply click and drag to a new location.
Subtract Tag B from Tag A
When pressed by the operator, causes HMC to read the current value in a defined register
designated as Tag B and then subtract this value from the current value in a targeted register
designated as Tag A.