User Manual

MAPware-7000 Programming Manual 157

1010-1040, Rev. 02

How to place an Add Value to Tag button object on a screen

1. Use one of the following:

a. click 

b. click 

2. Move cursor to a start point for the button object. Click and hold mouse cursor.

3. Drag mouse cursor to an end point for the button object and release. The button

appears on screen and the Add Value to Tag Properties box displays.

Options available using the Add Value to Tag Properties dialog box

 Language (List J)  highlight the language that must be selected to display the entered

text.

 Appearance Feedback Tag On/Off (List L)  select the On and/or Off labels.

 Button Style (List M)  selects 

 Feedback Tag (List N)  Enable this feature and select the same tag for both the target

address and the feedback tag address, if you wish to see the button change state (i.e. go



 Simulation (List Nc)  



 Task (List O)  Add Constant Value to Tag (cannot be modified)

 Value (List P)  this is the constant value that is added to the Tag Address

 Value Data Type (List Pa)  select the data format used to add the value to the target

 Design (List S)  identifies object

 Layout (List T)  coordinates (i.e. size and position) for the object

 Tag Properties (List Q)  Address of target to use

 Tag Address (List Qa)  this is the address of the target bit/coil that is toggled

 Tag Name (List Qb)  name assigned in the tag database to the target bit/coil