User Manual

MAPware-7000 Programming Manual 147
1010-1040, Rev. 02
 Button Style (List M)  
 Feedback Tag (List N)  enable this feature and select the same tag for both the target
address and the feedback tag address, if you wish to see the button change state (i.e. go

 Simulation (List Nc)  
av
 Task (List O) - toggle Bit (cannot be modified)
 Design (List S) - identifies object
 Layout (List T)  coordinates (i.e. size and position) for the object
 Tag Properties (List Q)  address of target to use
 Tag Address (List Qa)  this is the address of the target bit/coil that is toggled
 Tag Name (List Qb)  name assigned in the tag database to the target bit/coil
Resize a Toggle Bit button object
Move the mouse pointer over one of the resize handles. When the pointer changes to a double-
headed arrow, simply click and drag to a new location.
Bit Entry
Bit Entry is used to set/clear a targeted bit/coil. Two predefined messages display according to
the current value read in the targeted bit/coil. Messages can be of varying length (maximum of
40 characters). When a bit entry is on a screen that is currently shown on the HMC7000, the
HMC continuously polls the target bit register to determine which message to display.
Place a Bit Entry object on screen
1. Use one of the following:
a. click Entry from the standard menu
b. click  Entry from the Draw toolbar
c. click on the Bit Entry Display icon in the Objects toolbar