User Manual

MAPware-7000 Programming Manual 143
1010-1040, Rev. 02
 Border (List G) - add a line around the perimeter of the object.
 Flash (List D)  
 Font (List I)  select from one of four options- 5x7, 7x14, 10x14, and 20x28 pixels.
 Off/On Text  message text displayed according to the current value in the target
address. Maximum number of characters is 40.
 Text Color (List Kb) - Determines the color of the text. Click to display the color
palette.
 Design (List S) - identifies object.
 Display Data Properties  address of target.
 Tag Address (List Qa)  this is the address of the target bit/coil that is monitored.
 Tag Name (List Qb)  name assigned in the tag database to the target bit/coil.
 Layout (List T)  coordinates (i.e. size and position) for the object.
Resize a Bit Display object
The Bit Data object cannot resize (unless you change the Font attribute) but can move.
Display and Write
Set Bit
The Set Bit button sets a targeted bit/coil. The button displays with either text labels or a
graphic image to represent two states. When a set bit button is on screen, the HMC
continuously polls the target bit register to determine which state to display (feedback tag must
be enabled to display two states).