User Manual

118 MAPware-7000 Programming Manual
1010-1040, Rev. 02
Using Color Animation in MAPware-7000
Changing the color of the line to red using simulation mode.
B- Flash Animation 
on screen periodically depending upon the value (0-65535) in a tag register. This can

following options are displayed:
a. Flash Animation Properties: this lists a brief summary of all the options selected.
b. 

rent value is above the high limit or below the
low limit set).
c. High Limit: the upper limit that determines when to flash
d. Low Limit: the lower limit that determines when to flash
e. Speed: the rate at which flashing occurs when activated. Options are slow (0.5
fps- flashes per second), medium (1 fps), and fast (2 fps).
f. Tag List  the default tag register is D4095 but any 2-byte tag register can be
selected.
In this example, we will enable Flash Animation on a simple Text object and
select D300 as the tagged address used to control the flashing of the text: