Owner's manual

Operational Overview
The MAP450D Operator Interface Terminal (OIT) provides the human-machine interface
between an operator and an ASCII compatible computer or host controller. Any
controller that is capable of sending and receiving ASCII characters through a serial port
can potentially communicate to the MAP450D.
The MAP450D receives and sends simple ASCII character strings. It accepts:
•
printable ASCII characters — which immediately display on the OIT
•
non-printable ASCII control characters (Control Codes) — which directly affect the
OIT’s display
•
and special ASCII character combinations (Control Commands).
Control Commands cause the OIT to:
•
modify the OIT’s configuration parameters
•
echo back text
•
poll or clear the OIT’s buffers
•
display one of up to 500 predefined messages
•
or sound the OIT’s internal buzzer
3 MAP450D Operation Manual
1010-0101, Rev. 00