Instruction Manual

HMC7000 Series I/O Module Guide
Phone: [phone] • Fax: [phone] • Email: [e-mail] • www.maplesystems.com .
1010-1043 Page 16 of 85 Rev. 02, 11/08/2013
Wiring:
Configuration:
Use MAPware-7000 to assign output (Y and YW) addresses to the
module. These addresses are created according to the slot location of
the module, where nn refers to the slot number (ex. 01…05):
Register
Description
Access
Ynn000-
Ynn015
Output Bits
Read/Write
YWnn00
Output
Word Data
Read/Write