Instruction Manual

HMC7000 Series I/O Module Guide
Phone: [phone] • Fax: [phone] • Email: [e-mail] • www.maplesystems.com .
1010-1043 Page 14 of 85 Rev. 02, 11/08/2013
Wiring:
Configuration:
Use MAPware-7000 to assign output (Y and YW), and configuration
(MW) memory addresses to the module. These addresses are created
according to the slot location of the module, where nn refers to the
slot number (ex. 01…05):
Register
Description
Access
Ynn000-
Ynn011
Output Bits
Read/Write
YWnn00
Output
Word Data
Read/Write
MWnn00
Relay
Output
Read/Write