Installation Guide

Shelf Life and Application Properties at73°F(23°C)and50%relative
humidity
Pot life 40to50minutes
Shelf life
2 years when stored in original
containerat73°F(23°C)
in a heated area
Color
Milky white
Protection
Protect from freezing
Note: Drying time and open/working time may vary based on temperature, humidity,
substrate porosity, thickness of application and jobsite conditions.
Packaging
Product code Size
31291000(Canadaonly) Bottle:1U.S.qt.(946mL)
31276000(Canadaonly) Jug:2U.S.qts.(1,89L)
7050001 Jug:1U.S.gal.(3,79L)
7050005 Pail:5U.S.gals.(18,9L)
Approximate Product Coverage
Refer to Planipatch’s TDS for approximate product coverage rates.
• Whenlevelinglargeareas,useasathinapplicationonly.RefertoTechnicalData
Sheets (TDSs) at www.mapei.com for use of self-leveling products.
SUITABLE SUBSTRATES
When mixed full-strength with Planipatch:
• Properlypreparedcutbackandcarpetadhesiveresidue
• Existing,properlypreparedcementterrazzo
• Existing,properlypreparedandfullybondedceramictile
• Asinglelayerofproperlyprepared,fullybondedVCT
• Asinglelayerofproperlyprepared,fullybondedfelt-backedsheetvinyl
ConsultMAPEI’sTechnicalServicesDepartmentforinstallationrecommendations
regarding substrates and conditions not listed.
SURFACE PREPARATION
• Allsubstratesmustbestructurallysound,dry,solidandstable.
• Substrateshouldbecleanandfreeofdust,dirt,oil,grease,paint,curingagents,
concrete sealers, loosely bonded toppings, loose particles, epoxy adhesives,
urethane adhesives, and any other substance or condition that may prevent or
reduce adhesion.
• Concretemustbefreeofanynegativehydrostaticpressureand/orexcessive
moisture.
• RefertoMAPEI’s“SurfacePreparationRequirements”documentforoor-covering
installation systems at www.mapei.com.
MIXING
Note:Chooseallappropriatesafetyequipmentbeforeuse.RefertoMSDSformore
information.
Mixing Ratios for Planipatch Plus
Diluted(1partPlanipatch Plus to 3 parts water)
Package Size ................................................1U.S.gal.(3,79L)
Water to Add ................................................3U.S.gals.(11,4L)
TotalQuantityofLiquidMade ......................4U.S.gals.(15,1L)
Mixing with Planipatch powder ....................Nine10-lb.(4,54kg)bagsrequire4U.S.
gals.(15,1L)ofdilutedPlanipatch Plusliquid
Full-Strength
Package Size ................................................1U.S.gal.(3,79L)
Water to Add ................................................None
TotalQuantityofLiquidMade ......................1U.S.gal.(3,79L)
Mixing with Planipatch powder ....................Two10-lb.(4,54kg)bagsrequire1U.S.gal.
(3,79L)ofPlanipatch Plusliquid
Refer to Planipatchs TDS for application instructions.
RELATED DOCUMENTS
Reference Guide: Surface Preparation
Requirementsforoor-covering
installation systems
RGF0409*
* At www.mapei.com.
Refer to the MSDS for specific data related to VOCs, health and safety, and handling of
product.
STATEMENT OF
RESPONSIBILITY
Before using, user shall determine the suitability of the product for its intended use and
user alone assumes all risks and liability whatsoever in connection therewith. ANY
CLAIM SHALL BE DEEMED WAIVED UNLESS MADE IN WRITING TO US
WITHIN FIFTEEN (15) DAYS FROM DATE IT WAS, OR REASONABLY SHOULD
HAVE BEEN, DISCOVERED.
MAPEI Headquarters of the Americas
1144EastNewportCenterDrive
DeereldBeach,Florida33442
Phone:1-888-US-MAPEI
(1-888-876-2734)
Technical Services
1-800-992-6273(U.S.andPuertoRico)
1-800-361-9309(Canada)
Customer Service
1-800-42-MAPEI(1-800-426-2734)
For the most current BEST-BACKED™
product data and warranty information,
visit www.mapei.com.
Edition Date: February11,2010
PR4135PPPD_B10Evp©2010MAPEICorporation.
All Rights Reserved. Printed in the USA.
We proudly support the following industry organizations: