Installation Guide

Product Performance Properties at 73°F (23°C) and 50% relative humidity
Laboratory Tests Results
Polymer type Acrylic
Percent solids 43% to 45%
VOCs 92 g per L
pH 7 to 8
Viscosity (RV2 @ 20 rpm) 1,400 cps
Density 64.2 lbs. per cu. ft. (1,03 g per cm
3
)
Consistency Pourable liquid
Color White
Application temperature range 50°F to 90°F (10°C to 32°C)
Shelf Life and Application Properties at 73°F (23°C) and 50% relative humidity
Shelf life
2 years when stored in original, unopened packaging in
a dry, covered location
Window for application of SLU at 73°F (23°C)
2 to 3 hours of drying time up to 24 hours from application
over porous substrates (concrete, wood and gypsum); 4 to
5 hours of drying time up to 24 hours from application over
nonporous substrates (ceramic and VCT)
Flash point (Seta) > 212°F (100°C)
CSI Division Classication
Cast Underlayment 03 54 00
Packaging
Size
1 U.S. qt. (946 mL)
2 U.S. gals. (7,57 L)
Approximate Coverage*
Typical Application Tool Coverage
3/8" (10 mm) nap roller
2 U.S. gals. (7,57 L): 400 to 800 sq. ft. (37,2 to 74,3 m
2
)
1 U.S. qt. (946 mL): 50 to 100 sq. ft. (4,65 to 9,29 m
2
)
* Coverage depends on the substrate profile and porosity.
Pri
mer
T
™
Pri
mer
T
™