Installation Guide

PRODUCT APPLICATION
Single-Coat Application Method
1. Selectanappropriateat-edgedsteeltrowel.
2. Immediately apply mixed Planipatch to the substrate,
accordingtothedesiredthickness–upto1/2"(12mm)
maximumwhenmixedwithwater(A),or1/4"(6mm)
maximum when mixed with diluted Planipatch Plus
(B). Blend into the surrounding area and finish to the
requiredsmoothness.
3. Allowatleast60minutestodry.Finishwiththenal
floor covering chosen.
Two-Coat Application Method
1. Selectanappropriateat-edgedsteeltrowel.
2. Firstcoat:ImmediatelyapplymixtureofPlanipatch
and full-strength Planipatch Plus (C) to the substrate
accordingtoadesiredthickness,from1/16"to1/8"(1,5
to3mm).Blendintothesurroundingareaandnishto
therequiredsmoothness.Allowtodrycompletely.
3. Secondcoat:ImmediatelyapplymixtureofPlanipatch
and diluted Planipatch Plus (B) to the substrate
accordingtothedesiredthickness,from1/32"to1/4"
(1to6mm).Ensurethatallareaswitharstcoatare
completelycoveredbyasecondcoat.Allowatleast60
Planipatc
h
®
Planipatch
®
Shelf Life and Application Properties at73°F(23°C)and50%relativehumidity
Potlife 8to10minutes
Dryingtimerequiredbeforeoor-coveringinstallation* 60to90minutes,oroncetheproductiscompletelydry
Compressivestrength,28days(ASTMC109)
>3,500psi(24,1MPa)
Cleanability With water while still fresh
Shelf life
1year
whenstoredinoriginalcontainerat73°F(23°C)
in a heated area
* Drying time and open/working time may vary based on temperature, humidity, substrate porosity, thickness of application and
jobsite conditions.
Packaging
Product Code Size
10940000(Canadaonly) Bag:4.4lbs.(2,0kg)
0080010(U.S.);1091000(Canada) Bag:10lbs.(4,54kg)
10922000(Canadaonly) Bag:22lbs.(9,98kg)
0080025(U.S.only) Bag:25lbs.(11,3kg)
0080045(U.S.only) Pail:45lbs.(20,4kg)
Approximate Product Coverage
Size Thickness Applied Coverage*
4.4lbs.(2kg)
1/32"(1mm) 17to25sq.ft.(1,58to2,32m
2
)
1/8"(3mm) 4to6sq.ft.(0,37to0,56m
2
)
10lbs.(4,54kg)
1/32"(1mm) 40to56sq.ft.(3,72to5,20m
2
)
1/8"(3mm) 10to14sq.ft.(0,93to1,30m
2
)
22lbs.(9,98kg)
1/32"(1mm) 80to123sq.ft.(7,43to11,4m
2
)
1/8"(3mm) 20to31sq.ft.(1,86to2,88m
2
)
25lbs.(11,3kg)
1/32"(1mm) 100to140sq.ft.(9,29to13,0m
2
)
1/8"(3mm) 25to35sq.ft.(2,32to3,25m
2
)
45lbs.(20,4kg)
1/32"(1mm) 180to251sq.ft.(16,7to23,3m
2
)
1/8"(3mm) 45to62.8sq.ft.(4,18to5,83m
2
)
* Coverages shown are for estimating purposes only. Actual jobsite coverage may vary according by application method,
substrate, substrate conditions and actual thickness applied.