Assembly Instructions

Mapa Chemical
Butoflex 651
Overall Chemical Protection Rating
Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to
provide users with an overall protection guideline when using our glove products against specific chemicals.
Used for high chemical exposure or chemical immersion, limited to BTT based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative BTT based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT : Not tested
NA : Not applicable because not fully tested (only degradation OR permeation results)
The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may
vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time, such as concentration and
temperature, glove thickness and glove reuse, may also affect performance. Other glove requirements, such as length, dexterity, cut, abrasion,
puncture and snag resistance, or glove grip also need to be considered in making your final selection.
Mapa Professionnel
Défense Ouest - 420, rue d'Estienne d'Orves - 92705 Colombes Cedex - France
Tel: [phone] - Fax: [phone]
www.mapa-pro.com
Chemical Product CAS #
BTT
(minutes)
Permeation
level
Standard
Degradation
level
Rating
2-Propanol (Isopropanol) 99% 67-63-0 480 6 EN 374-3:2003 4
++
Acetic acid 10% 64-19-7 480 6 EN 374-3:2003 4
++
Acetic acid 50% 64-19-7 480 6 EN 374-3:2003 4
++
Acetic acid 99% 64-19-7 480 6 EN 374-3:2003 4
++
Acetone 99% 67-64-1 480 6 EN 374-3:2003 4
++
Acetonitrile 99% 75-05-8 480 6 EN 374-3:2003 NT
NA
Acrylic acid 95% 79-10-7 480 6 EN 374-3:2003 4
++
Acrylic acid 99% 79-10-7 480 6 EN 374-3:2003 4
++
Ammonia 99% 7664-41-7 480 6 EN 374-3:2003 NT
NA
Carbon disulfide 99% 75-15-0 480 6 EN 374-3:2003 NT
NA
Chlorine 100% 7782-50-5 480 6 EN 374-3:2003 NT
NA
Dichloromethane (Methylene
Chloride) 99%
75-09-2 12 1 EN 374-3:2003 2
=
Diethylamine 98% 109-89-7 11 1 EN 374-3:2003 2
=
Dimethylformamide 99% 68-12-2 480 6 EN 374-3:2003 4
++
Ethanol 95% 64-17-5 480 6 EN 374-3:2003 4
++
Ethyl acetate 99% 141-78-6 240 4 EN 374-3:2003 4
++
Ethyl methacrylate 99% 97-63-2 81 3 ASTM F739 NT
NA
Formic Acid 100% 64-18-6 NT NT 4
NA
Formic Acid 96% 64-18-6 NT NT 4
NA
Hydrochloric acid 10% 7647-01-0 NT NT 4
NA
Hydrochloric acid 35% 7647-01-0 NT NT 4
NA
Hydrochloric acid 37% 7647-01-0 NT NT 4
NA
Hydrofluoric Acid 10% 7664-39-3 480 6 EN 374-3:2003 NT
NA
Hydrofluoric Acid 49% 7664-39-3 480 6 EN 374-3:2003 NT
NA
Hydrogen bromide 100% 10035-10-6 NT NT 4
NA
Hydrogen bromide 47% 10035-10-6 NT NT 4
NA
*not normalized result
Document generated on 2017-11-10 - Page 1/3