Specification Sheet

ManualsBrandsMAPA Professional ManualsCut Resistant GlovesMAPA® Krynit Grip & Proof 600 Nitrile Fully Coated HDPE Gloves, Cut Level A2, 1 Pair, Size 8

www.mapa-pro.com

Krynit Grip and Proof 600

DESCRIPTION AND GENERAL PROPERTIES

• Cut and oilproof. Fully dipped, repeals oil penetration, reduce dermatitis while ensuring you cut protection

• Grip & Proof coating ensures an excellent grip in oily environments.

• Excellent abrasion resistance due to nitrile coating

• Unbeatable fingertip sensitivity.

• Long lasting and cost effective: washable until 5 cleaning cycles (see laundering and drying conditions)

MAIN FIELDS OF USE

Automotive/mechanical industry

• Pump manufacturing

• Machining parts using cutting oil

• Handling oily mechanical parts

• Handling and sorting small, sharp parts

• Bodywork assembly

Other industries

• Maintenance in wet environments

• Machine maintenance

• Glass working

Mechanical industry

• Maintenance in wet environments (water, oil, greases,

hydrocarbons)

• Precision assembly

• Cutting and stamping metal

INSTRUCTIONS FOR USE

Instructions for use

It is recommended tocheck that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the

«CE»-type tests.

• It is not recommended for persons sensitized to dithiocarbamates and to natural latex (wrist with elastic natural rubber).

• Put the gloves on dry, clean hands.

• Ensure the inside of the gloves is dry beforeputting them on again.

• Inspect the gloves for cracks or snags beforereusing them.

• Nor to use them next to moving machinery

Storage conditions

Store the glove in their original packaging protected from heat, lightand humidity

Laundering conditions

Wipe gloves contaminated with oil or grease with a drycloth before removing them. Performances of the gloves are not negatively affected

by cleaning up to 5 cleaning cycles* under the conditions described above: Use of a household or industrial washing machine and a standard

liquid detergent, synthetic program temperature 60 ° Cand spin drying at 400 rotations per minute. Improper use of the gloves orsubmitting

them to a cleaning or laundering process that is not specifically recommended can alter their performance levels.

The customer or the launderer is sole responsible for the compliance with the washing conditions.

* Test performed: 5 successive washes on unworn gloves.

Drying conditions

Tumble drying at 60°C maximum. Ensure the inside of thegloves is dry before putting them on again.

LEGISLATION

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This

product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the

regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

• CE-Type Examination Certificate

0075/014/162/09/13/1082 ext 02/06/14

• Issued by the notified body nr

0075 - C.T.C - 4 rue Hermann Frenkel - 69367LYON Cedex 07 France

2017-11-10