Specification Sheet

A
www.mapa-pro.com
For more details: www.mapa-pro.com
MAPA SPONTEX PROFESSIONNEL - Défense Ouest - 420, rue d’Estienne d’Orves - 92705 Colombes Cedex - FRANCE
Tel: [phone] - Fax: [phone]
Legends
SPECIFIC CHEMICAL
PROTECTION
EN 374
Letter Chemical
Code product
A Methanol
B Acetone
C Acetonitrile
D Dichloromethane
E Carbon Disulfide
F Toluene
G Diethylamine
H Tetrahydrofurane
I Ethyl acetate
J n-Heptane
K Sodium hydroxide 40%
L Sulphuric acid 96%
LOW CHEMICAL
PROTECTION
EN 374
MICRO-ORGANISMS
EN 374
HEAT
AND FIRE
EN 407
PERFORMANCE LEVELS
0-4 0-4 0-4 0-4 0-4 0-4
Resistance to large quantities of molten metal
Resistance to small drops of molten metal
Radiant heat resistant
Convective heat resistance
Contact heat resistance
Burning behaviour
MECHANICAL
HAZARDS
EN 388
PERFORMANCE LEVELS
0-4 0-5 0-4 0-4
Puncture resistance
Tear resistance
Blade cut resistance
Abrasion resistance
RADIOACTIVE
CONTAMINATION
EN 421
COLD HAZARDS
EN 511
PERFORMANCE LEVELS
0-4 0-4 0 or 1
Water permeability
Contact cold resistance
Convective cold resistance
CUT PROTECTION > Precision work
Krynit Grip and Proof 600
DESCRIPTION AND GENERAL PROPERTIES
PERFORMANCE RESULTS
• Material Nitrile GRIP&PROOF coating
• Length (inches) 9.05-11.02
• Wrist Knitted wrist
• Colour/Color Black
• Interior finish Seamless textile support from HDPE fibres
• Exterior finish Fully-coated
• Size / EAN 7 8 9 10
• Packaging 1 pair/bag - 12 pairs/bag - 48 pairs/carton
• Complementary information Guaranteed DMF free Guaranteed Silicone free on palm
and fingers
Certification category 2
ISO 13997 defines the weight on the blade required to cut in a single movement.
Data was obtained according to ISO 13997, from the average of several measurements. As Individual specimens will obviously have greater
or lesser cut resistance than the average, so this result can provide only a general indication of the cut resistance of any protective
material.
4343CUT
ANSI
A2
ISO 13997 :
7 N (671 g)
.
2017-11-10