Specification Sheet

A
www.mapa-pro.com
For more details: www.mapa-pro.com
MAPA SPONTEX PROFESSIONNEL - Défense Ouest - 420, rue d’Estienne d’Orves - 92705 Colombes Cedex - FRANCE
Tel: [phone] - Fax: [phone]
Legends
EN 407
EN 388
ANSI
CUT
EN 511
EN 421
THERMAL RISKS
heat and fire
MECHANICAL HAZARDS
CUT RESISTANCE
COLD HAZARDS
RADIOACTIVE
CONTAMINATION
CHEMICAL RISKS MICRO-ORGANISMS
PERFORMANCE LEVELS
PERFORMANCE LEVELS
PERFORMANCE LEVELS
Burning behaviour
Abrasion resistance
Contact heat resistance
Blade cut resistance
Convective heat resistance
Tear resistance
Radiant heat resistant
Puncture resistance
Convective cold resistance
Resistance to small drops of molten metal
Cut resistance according to ISO 13997
Contact cold resistance
Resistance to large quantities of molten metal
A Methanol
B Acetone
C Acetonitrile
D Dichloromethane
E Carbon Disulfide
F Toluene
G Diethylamine
H Tetrahydrofurane
I Ethyl acetate
J n-Heptane
K Sodium hydroxide 40%
L Sulphuric acid 96%
M Nitric acid 65%
N Acetic acid 99%
O Ammonia 25%
P Hydrogen peroxide 30%
S Hydrofluoric acid 40%
T Formaldehyde 37%
A1 ≥ 200 G
A2 ≥ 500 G
A3 ≥ 1000 G
A4 ≥ 1500 G
A5 ≥ 2200 G
A6 ≥ 3000 G
A7 ≥ 4000 G
A8 ≥ 5000 G
A9 ≥ 6000 G
Impact protection
Water permeability
0-4
0-4
0-4
0-4
0-5
0-4
0-4
0-4
0 or 1
0-4
0-4
0-4
A-F
0-4
(P)
EN ISO 374-1
Type A
U V W X Y Z X Y Z
EN ISO 374-1
Type B
EN ISO 374-1
Type C
EN ISO 374-5
EN ISO 374-5
VIRUS
Potection against bacteria,
fungi
Potection against bacteria,
fungi, virus
A1
HANDLING PROTECTION > Precision work
Ultrane 500
DESCRIPTION AND GENERAL PROPERTIES
PERFORMANCE RESULTS
• Material Nitrile GRIP&PROOF coating
• Length (inches) 9.06-11
• Thickness (inches) Light Weight
• Wrist Knitted wrist
• Colour/Color Black
• Interior finish Seamless textile support
• Exterior finish Ventilated back
• Size / EAN 6 7 8 9 10 11
• Packaging 1 pair/bag - 12 pairs/bag - 96 pairs/carton
• Complementary information Guaranteed DMF free and guaranteed Silicone free
Certification category 2
ISO 13997 defines the weight on the blade required to cut in a single movement.
Data was obtained according to ISO 13997, from the average of several measurements. As Individual specimens will obviously have greater
or lesser cut resistance than the average, so this result can provide only a general indication of the cut resistance of any protective
material.
4121XCUT
ANSI
A1
ISO 13997 :
3.4 N (327 g)
.
2017-11-10