Tus neeg siv phau ntawv

Operation Instruction and Handling precautions

If the microphone head is covered by hand or the microphone is approached to the

speaker, a howling sound may be generated, this phenomenon of howling is caused by

the microphone pick up the sound output from the speaker. To prevent this, first

decrease the volume, then place the microphone so that it is not pointed to the speaker

and that there is a sufficient distance between the microphone and speaker.

The microphone is a sensitive equipment, do not drop, hit it or apply shock to it;

Do not store the microphone in a place with high temperature or humidity.

Pointer for Proper Use of Microphone

The optimum distance between the microphone and mouth is from 5 to 10 centimetres’

the microphone is too close to the mouth, the sound may be unclear with too-much

enhanced bass (proximity effect) or may be uncomfortable to ears with pop noise

generated every time the singer breathes in and out.

Plugging the Connector In/Out

TO plug in:

Align the hollow pat of the output connector on the microphone body with the projected

part of the connector on the cord, and push in until I a CLICK sound is heard.

To plug out:

while holding the tab on the cord connector depressed, pull it out of the connector

microphone. Done.