User Manual Portable Live Streaming and Podcast Console For Computer & Smartphone
Product Description Maonocaster AU-AM200 is a comprehensive solution for audio processing that integrates audio collecting, processing and output controlling. It is compatible with smartphones, tablets and computers, including Android, iOS, Window and macOS. It is plug-and-play with no extra driver required. The built-in DSP digital audio processor makes it possible to vary your voice and add more sound effect to your podcast with one single button, which will make your livestream more entertaining.
Product Layout 9 1 12 LO MID 10 HI 2 REC 13 11 14 ELECTRON MIC ECHO OPENING APPLAUSE GUNSHOT LAUGHTER BOOING AWKWARD SLAPPING CHEERING MONITOR 3 4 5 POD1 OUTPUT 15 16 17 POD2 OUTPUT EFFECT PITCH MUSIC ONLY DENOSIE LOOP BACK SIDE CHAIN 6 POD3 OUTPUT 18 - 02 - 8 MUSIC 7 OUTPUT MUSIC OUTPUT 19 20 HEADSET 21 MIC1 22 MIC2
1. Microphone volume control Rotate the control knob clockwise to increase the volume of the microphone. 2. Accompaniment volume control Rotate the control knob clockwise to adjust the volume of the external accompaniment music. When in use, you can turn clockwise to increase the volume of accompaniment music or counterclockwise to decrease the volume of accompaniment music. 3. Reverb effect control Slide the control fader up to increase the reverb effect and vice versa. 4.
7. Vocal FX There are six function buttons in this area, which are EFFECT, PITCH, MUSIC ONLY, DENOISE, LOOP BACK , SIDE CHAIN. 7.1 "EFFECT" The button has 4 modes corresponding to different light colors, including the original sound mode (Pink ), professional mode (red), pop mode (blue), and yelling mode (green). 7.2 " PITCH" button has 4 modes corresponding to different light colors, including male to female (red), female to male (blue), girlish voice (green), robot (Pink).
11. Microphone Volume Level Display Indicate the volume of the microphone. 12. Battery Level Display 4 LED lights on means 100% fully charged, 3 LED lights on means 75%, 2 LED lights 50%, 1 LED 25%; The power indicator LED flashes and red light on when charging. 13. Accompaniment Volume Display Indicate the volume of the accompaniment. 14. Wireless Bluetooth Accompaniment The Bluetooth will automatically be on and pairing when turn on the podcast console.
22. Microphone interface It can be connected to a 3.5 mm condenser microphone that does not require external power supply, such as MAONO A03, A340, PM325 and other models. Sound card connection guide 1. Karaoke by mobile phone POD1 OUTPUT POD2 OUTPUT POD3 OUTPUT OUTPUT MUSIC INPUT HEADSET MIC1 MIC2 Connect to one of the three POD output Condenser microphone Smartphone Audio cable Monitoring headsets 1. Connect the smartphone/headsets/microphone to the podcast console as the picture shows. 2.
2. Live Streaming on mobile phones POD1 OUTPUT POD2 OUTPUT POD3 OUTPUT OUTPUT MUSIC INPUT HEADSET MIC1 MIC2 Broadcast interface Smartphone 1 Condenser Microphone Smartphone 1 Smartphone 2 Smartphone 2 Smartphone 3 Monitoring headset Smartphone 3 Phone for accompanimen 1. Connect the mobile phone/headsets/microphone to the podcast console as the picture shows. 2. Download the steaming app on smartphone. 3. Turn on the podcast console and select the sound effects needed. 4.
3. Live streaming on computer POD1 OUTPUT POD2 OUTPUT POD3 OUTPUT OUTPUT MUSIC INPUT HEADSET MIC1 MIC2 USB-C cable Condenser Microphone Audio cable Audio cable Monitoring headset Phone for accompaniment Computer 1. Connect the accompaniment music (smartphone), headsets, and microphone to the podcast console as the pictures shows. 2. Connect the computer and the podcast console by USB-C cable. The computer will automatically recognize the podcast console and select the driver. 3.
4. Open the live streaming software on the computer and confirm again in software settings that "MAONO AU-AM200" is the the default audio and playback device. NOTE: • You can stream to computer and smartphone at the same time. • Please activate "LOOP BACK" mode during call-in in live streaming. • Please adjust settings on the podcast console for each software individually. 4.
5. Bluetooth Connection This podcast console has a Bluetooth connection feature (refer to item 14 in the function introduction), which can be connected to a smartphone for live accompaniment. LO MID HI REC ELECTRON MIC 1. Turn on the podcast console, the Bluetooth light on the front of the sound card starts to flash. 2. Search for the device in the Bluetooth menu of the phone,APPLAUSE find the Bluetooth device of "MAONO OPENMING GUNSHOT LAUGHTER AU-AM200", and choose it to connect. 3.
6.3 No sound from headphones ① Please check whether the headphone cable is inserted into the correct interface. It should be inserted to the "headset" or "sound" interface. ② Please check whether is the "monitor fader" of the sound card upwards. You can gradually increase the volume by sliding it up. 6.4 No sound from the microphone ① Please check whether the microphone is correctly connected to the microphone interface. If not, please try again.
Model : AU-AM200 Technical Support: support@maono.com www.maono.
