Use and Care Manual

Posion your completed mantel close to its final locaon. Make sure you can access the back of
the mantel as your electric fireplace appliance will be installed from back.
Using a Phillips head screwdriver, remove the screws and the metal mounng center opening.
Next unpack the electric fireplace appliance carefully. Posion the appliance behind the fire-
place with front facing the wood mantel. With the help of an adult assistant, li the appliance
and gently slide it into the opening in the mantel. Make sure the appliance is centered le and
right in the opening. Be careful when placing appliance and adjusng, boom of appliance could
scratch the finish of the base/hearth of your fireplace. Re-aach the mounng brackets with the
Phillips head screwdriver, and supplied screws.
3
REAR VIEW OF FIREPLACE
1“
1“
1.5”
ELECTRIC
FIREPLACE
INSERT
A
1.5”
1“
1“
ELECTRIC
FIREPLACE
INSERT
B
INSTALLATION INSTRUCTION
DO NOT OVER TIGHTEN. With the help of an
assistant, carefully li completed unit and place
it with the front facing out in the final locaon
you have chosen for your fireplace. Make sure
to secure the electrical cord before liing or
moving completed fireplace. When choosing a
final locaon, make sure you will have clear
access to grounded electrical outlet.