Manualshelf

Use and Care Manual

ManualsBrandsmaocao hoom ManualsElectric Fireplaces60 in. D x 4.3 in. W Tempered Glass Front Wall Mounted Electric Fireplace with Remote and LED Light Heater in Black
6789101112131415
01 02 03 04 05 06 07 08
09 10
11 12 13 14 15
OPERATING INSTRUCTION
The control panel is located on the top right corner of the unit.
To control the unit, touch any button to wake up the control panel. The power button will flash, and all other buttons will
light up.
The control panel will turn off after 10 seconds of inactivity.
Power ButtonHeat ButtonEmber Bed ButtonDisplay Window
Flame ButtonTimer Button
Brightness Button
Power
The Power Button turns the fireplace ON and OFF. When the fireplace is OFF, touch any button to wake up the control
panel, and the power button will flash.Then touch the Power Button to turn on the fireplace. Touch the Power Button
again to turn off the fireplace.
The fireplace has a built-in memory function and when turned back on it starts at the last used settings (except timer).
If the fireplace is disconnected from the main power source, it reverts to the default settings.
Flame
This button is used to turn flames ON, to alter the flame color and to turn flames OFF. Press the Flame button multiple
times to cycle through color rotation option (01), 15 color options (02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15,
16) and flames OFF.
Heater
This button is used to turn heater ON, to alter the temperature. With temperature displayed and blink, Press the heat
button multiple times to cycle through：82℉ -ON - 64℉-66℉-68℉-70℉-72℉-74℉-76℉-78℉-80℉(27℃-ON - 18
℃-19℃-20℃-21℃-22℃-23℃-24℃-25℃-26℃).
With temperature displayed and not blink, Press the heat button once to turn heater OFF.
Temperature unit convert function: When the heater is on, press and hold the Power Button for 5 seconds, current
temperature unit display will flash 3 times and convert to another temperature unit (Note: Temperature unit convert
function can't be set with the remote control).
Lock & unlock heater function: press and hold the Heater Button for 10 seconds, the ember bed will flash 6 times,
indicating that the heater function is locked. To unlock the heater function, just repress and hold the heater button for
10 seconds again, then the ember bed will also flash 6 times indicating the heater function is unlocked and to recover
the original states which you have set.(Note: Lock & unlock heater function can't be set with the remote control).
Control Panel