Use and Care Manual

P.8
RTA-TS220L
P.8
With the tabletops (9) and (10) upside-down and oriented as shown, attach to them the brackets (11)
using screws (A) as shown.
(This view shows the tabletops upside-down on the floor)
With the help of another person, place the frame from step 6 upside-down over the tabletops (9) and (10)
making the holes coincide, then assemble the frame using screws (C) as shown.
TO AVOID
MISALIGNMENTS, FIRST
SCREW LOOSELY AND
TIGHTEN AFTER ALL THE
SCREWS ARE IN PLACE.
Assemble the stand support (14) to the stand panel (13) using screws (A), then insert the protectors from
the fixing set (12) in the supports as shown.