Use and Care Manual

P.6
RTA-TS220L
P.6
Using screws (A), secure the legs (1) and (2) to the base (3) and the frame (7) as shown.
With the long frame structure (8) oriented as shown, attach the structures as indicated:
1
st
: Leg (1) to frame (8) on the right, and leg (2) to frame (8) on the left;
2
nd
: Base (4) to leg (1) on the right, and base (5) to leg (2) on the left.
3
rd
: Leg (2) to base (4) and frame (8) on the right, and leg (1) to base (5) and frame (8) on the left.
PAY CLOSE ATTENTION TO THE ORIENTATION OF THE PARTS.
(1ST)
(2ND)
(3RD)
(1ST)
(This view shows the back side of the frame upside-down on the floor)
(This view shows the back side of the frame upside-down on the floor)