Owner`s manual

best and stainless steel or other quality plating is preferable to decrease corrosion.

Charger Operation

figure 02. Charger Layout (see final section for new 8A layout)

Turning the Charger On and Off

There is an ON/OFF Breaker to the left of the blue user control panel at the top of

the charger. This breaker is the main switch to turn the charger on or off. If ever

there is a concern while charging first shut off this breaker switch.

NOTICE! DO NOT unplug the Anderson connectors (DC line) from your charger

while it is charging! If the battery pack is disconnected while the charger is putting

out power the charger can be damaged. Failure to heed these warnings may

result in significant internal damage to the charger which is not covered under

your warranty!