Specifications

2. Place the bottom slots of the bulkhead over the pins in the frame and rotate
the bulkhead upward.
3. Fasten the captive screw in the center of the bulkhead to secure it to the
cabinet frame.
4. Connect all external SDI cables.
5. Replace the cabinet rear panel. (See Section 4.1.2.)
Figure 4–3 Removing the I/O Bulkhead
CAPTIVE
SCREW
RA9x
I/O PANEL
SA7x
I/O PANEL
SA650/SA850
I/O BULKHEAD
INTERNAL SDI
CABLE SCREW
HOLES
EXTERNAL
CABLES
CXO-2463C
SDI
CABLE
TROUGH
SA650/SA850
I/O BULKHEAD
ASSEMBLY
(REMOVED)
Removing and Replacing Cabinet Components 4–5