Specifications

3.8 Installing the OCP Label
The standard OCP labels are in English. A package of self-adhesive labels
in other languages is also supplied. To change the labels, simply place the
appropriate label over the English label and press into place, as shown in
Figure 3–18.
Figure 3–18 OCP Label
PEEL OFF
STRIPS
TEST
SWITCH
UNIT
NUMBER
FOUR-CHARACTER
ALPHANUMERIC
DISPLAY
PORT B
SWITCH
PORT A
SWITCH
STATE LED
INDICATORS
WRITE PROTECT
SWITCH
FAULT
SWITCH
RUN
SWITCH
ADHESIVE
LABEL
CXO-2718B
3.9 Connecting the 881 Power Controller
All storage arrays are shipped with the internal power cords installed and
connected. This section describes the 881 power controller and explains how
to safely connect power to the storage array. The types of storage array power
controllers are as follow:
• The 881A power controller is used for 120 Vac 60 Hz installations.
• The 881B power controller is used for 220 Vac 50 Hz installations.
Installing a Storage Array 3–27