Specifications

2. Remove the red shipping brackets from the storage devices.
See the SA482 Storage Array User Guide for procedures for removing RA82
shipping brackets and packing materials.
3. Remove the two filler panels packed outside the cabinet and unwrap the
panels.
Each filler panel includes four 10-32 x 1/2-inch screws and two captive studs
with wing nuts. Two screws will be inserted in either end of the filler panel.
The captive studs are located on top of each panel as shown in Figure 3–8.
The filler panels are not identical. One panel has two rectangular cable
openings; the other is solid. The position of the panels is determined by cable
routing. To route cables out the top, install the cable filler panel in the top
position; to route cables out the bottom, install the cable filler panel in the
bottom position.
3–12 Installing a Storage Array