Specifications

Figure 3–5 Adjusting the Cabinet Leveler Feet
LOCKNUT
LEVELER
HEX NUT
LEVELER
FOOT
CXO-395C_S
7. Move the cabinet to its final position.
3.3.3 Leveling the Cabinet
With the cabinet in its final location, use the following procedure to level the
cabinet:
1. Loosen the locknuts on all four leveler feet (refer to Figure 3–5).
2. Turn each leveler hex nut clockwise until the leveler foot contacts the floor.
3. Adjust all four feet until the cabinet is level and the load is removed from all
casters. Ensure that the casters spin freely.
3.4 Assembling the H9A00 Cabinet
When the H9A00 cabinet is shipped:
• The sliding side panels are pressed back into the cabinet, flush with the
vertical I/O bulkhead.
• The top and bottom filler panels are packed outside the cabinet.
• The rear panel is secured to the vertical I/O bulkhead with four 10-32 x
1/2-inch screws.
Installing a Storage Array 3–9