Specifications

Figure 3–4 H9646 Unloading Ramps
CXO-688C_S
SHIPPING
PALLET
RIGHT RAMP
ATTACHES HERE
STEEL
DOWEL
RIGHT
UNLOADING
RAMP
EXTEND RAMP TO
FULL LENGTH
LEFT
UNLOADING
RAMP
2. Remove the shipping brackets from the cabinet levelers.
3. Loosen the locknuts on all four leveler feet, as shown in Figure 3–5.
4. Screw the cabinet levelers up as far as they will go.
5. Tighten the locknuts on all four leveler feet.
WARNING
Cabinet levelers must be fully raised to ensure they clear the floor when
the cabinet reaches the end of the unloading ramp.
If the cabinet levelers do not clear the floor, they can cause the cabinet to
tip over. Injury may result.
6. Carefully roll the cabinet down the ramps as shown in Figure 3–6.
3–8 Installing a Storage Array