Specifications

Always observe the following precautions:
WARNING
Hazardous voltages are present inside the storage cabinet and enclosures.
You must be a qualified Digital Multivendor Services engineer to install
storage arrays or storage devices. Otherwise, you may injure yourself or
others and you may damage the equipment. To be considered a qualified
Digital Multivendor Services engineer, you must have successfully
completed the electrical safety courses listed in Table 1.
CAUTION
Do not attempt to install the storage array unless you have received
training in electrostatic discharge (ESD) procedures and have taken
proper precautions against ESD. Wear an ESD grounding strap properly
connected to a known ground, such as the SA7x enclosure chassis (see
Figure 3–1), or the ESD ground bolts in the SA900 storage array. The
SA900 grounding bolt is in the second mounting hole from the top in the
right-hand mounting strip, both front and rear.
3–2 Installing a Storage Array