Specifications

Table 2–20 (Cont.) SA900 Physical Specifications
Model Height Width Depth
Installed
Weight
Shipping
Weight
SA900–SE
SA900–SF
170 cm
(66.9 in)
61.0 cm
(24.0 in)
108 cm
(42.5 in)
533 kgs
(1172 lbs)
612 kgs
(1347 lbs)
SA900–TE
SA900–TF
170 cm
(66.9 in)
61.0 cm
(24.0 in)
108 cm
(42.5 in)
201 kgs
(442 lbs)
280 kgs
(617 lbs)
SA900–TG
SA900–TH
170 cm
(66.9 in)
61.0 cm
(24.0 in)
108 cm
(42.5 in)
238 kgs
(524 lbs)
317 kgs
(699 lbs)
SA900–TJ
SA900–TK
170 cm
(66.9 in)
61.0 cm
(24.0 in)
108 cm
(42.5 in)
275 kgs
(606 lbs)
355 kgs
(781 lbs)
Table 2–21 SA900 General Electrical Specifications
Specification 110-120 Vac 60 Hz 220-240 Vac 50 Hz
Inrush Current per Drive 60 amperes peak @ 132 Vac 70 amperes peak @ 264 Vac
Power Factor 0.7 0.58
Power Controller Data
Model
Cabinet Plug Type
Power Cord Length
881A
NEMA L21-30P
4.42 m (14.5 ft)
881B, 887B
IEC309
4.42 m (14.5 ft)
The storage arrays are not line-frequency dependent. The input currents (that is,
startup, PH1, PH2, PH3, and neutral) are for nominal voltages of either 120 Vac
or 240 Vac to neutral. These correspond directly to 208 Vac or 416 Vac phase-to-
phase, respectively. Nominal voltages of 110 Vac and 220 Vac have proportionally
higher phase currents on a ratio of 120:110 and 240:220 to the current specified
in Tables 2–22 and 2–23.
Table 2–22 SA900 Electrical Specifications—120/208 Vac 60 Hz
Input Current (Amps) Power Dissipation
Model Start-Up PH1 PH2 PH3 Neutral Watts BTUs/Hr
H9A00-BA 0.5 0.5 0.0 0.0 0.5 50 171
SA900–AA 6.8 0.5 0.0 3.4 3.4 291 993
SA900–AE 6.8 0.5 0.0 3.4 3.4 291 993
SA900–BA 6.8 0.5 0.0 3.4 3.4 291 993
SA900–CA 6.0 3.6 0.0 0.0 3.6 332 1133
SA900–JA 13.5 3.6 6.2 3.1 7.4 1014 3461
SA900–KA 13.5 3.6 6.2 3.1 7.4 1014 3461
SA900–KE 13.5 3.6 6.2 3.1 7.4 1014 3461
SA900–RA 22.5 22.9 9.3 9.3 16.6 2870 9796
SA900–SA 27.5 14.0 10.1 10.1 18.0 2460 8396
SA900–SE 27.5 14.0 10.1 10.1 18.0 2460 8396
SA900–TE 2.1 0.5 0.8 1.3 1.3 235 804
SA900–TG 4.2 1.8 1.6 1.3 2.1 420 1436
SA900–TJ 6.3 2.6 1.6 2.6 2.9 605 2069
2–20 Storage Array Descriptions