Specifications

Table 2–15 SA650 and SA850 Physical Specifications
Model Height Width Depth
Installed
Weight
Shipping
Weight
SA650–FA
SA650–FD
SA850–FA
SA850–FD
156.2 cm
(61.5 in)
55.9 cm
(22.0 in)
91.4 cm
(36.0 in)
257 kgs
(565 lbs)
325 kgs
(714 lbs)
SA650–HA
SA650–HD
SA850–HA
SA850–HD
156.2 cm
(61.5 in)
55.9 cm
(22.0 in)
91.4 cm
(36.0 in)
318 kgs
(703 lbs)
396 kgs
(852 lbs)
SA650–JA
SA650–JD
SA850–JA
SA850–JD
156.2 cm
(61.5 in)
55.9 cm
(22.0 in)
91.4 cm
(36.0 in)
470 kgs
(1039 lbs)
538 kgs
(1188 lbs)
Table 2–16 SA650 and SA850 General Electrical Specifications
Specification 110-120 Vac 60 Hz 220-240 Vac 50 Hz
Inrush Current per Drive 12.8 amperes peak @ 132 Vac 14.5 amperes peak @ 240 Vac
Power Factor 0.7 0.58
Power Controller Data
Model
Cabinet Plug Type
Power Cord Length
881A
NEMA L21-30P
4.42 m (14.5 ft)
881B
IEC309
4.42 m (14.5 ft)
The storage arrays are not line-frequency dependent. The input currents (that is,
startup, PH1, PH2, PH3, and neutral) are for nominal voltages of either 120 Vac
or 240 Vac to neutral. These correspond directly to 208 Vac or 416 Vac phase-to-
phase, respectively. Nominal voltages of 110 Vac and 220 Vac have proportionally
higher phase currents on a ratio of 120:110 and 240:220 to the current specified
in Tables 2–17 and 2–18.
Table 2–17 SA650 and SA850 Electrical Specifications—120/208 Vac 60 Hz
Input Current (Amps) Power Dissipation
Model Start-up PH1 PH2 PH3 Neutral Watts BTUs/Hr
SA650–FA
SA650–HA
SA650–JA
12.3
17.8
17.8
0.5
3.6
6.7
3.1
3.1
10.4
7.3
10.4
10.4
7.2
10.3
14.5
939
1503
2392
3205
5130
8164
SA850–FA
SA850–HA
SA850–JA
12.3
17.8
17.8
0.5
3.6
6.7
3.1
3.1
10.4
7.3
10.4
10.4
7.2
10.3
14.5
939
1503
2392
3205
5130
8164
2–14 Storage Array Descriptions