Specifications

O
Operator control panel (OCP)
affixing the label, 3–27
P
Packing storage devices, 5–6
Part numbers, SAxxx, B–1
Power controller
description, 2–3
powering up, 3–28
Power cords
for SA550/SA650/SA850, 5–51
for SA600/SA800, 5–20
for SA650/SA850, 5–20
for SA900, 5–33, 5–60
Preparing the SA900 cabinet, 5–25
R
RA82 disk drive
description, 2–1
RA90/RA92 disk drive
description, 2–2
RA9x disk drive
installed as add-on in SA600/SA800, 5–7
installed as add-on in SA650/SA850, 5–7
installed as add-on in SA900, 5–30
Ramps, unloading, 3–7
Removing and replacing cabinet parts
I/O bulkhead in the H9646 cabinet, 4–3
S
SA550 storage array
configurations, 2–5
specifications, 2–5
SA600 storage array
configurations, 2–8
removing stabilizer plates, 5–7
specifications, 2–10
SA650 storage array
configurations, 2–12
specifications, 2–12
SA7x enclosure
description, 2–1
installed as add-on in SA550/SA650/SA850,
5–42
installed as add-on in SA900, 5–56
SA800 storage array
configurations, 2–8
specifications, 2–10
SA850 storage array
configurations, 2–12
specifications, 2–12
SA900 storage array
configurations, 2–15
specifications, 2–19
Safety courses, ix
SDI cables (external)
connecting during installation, 3–15
for SA550/SA650/SA850, 5–51
for SA600/SA800, 5–20
for SA650/SA850, 5–20
for SA900, 5–33, 5–60
Serial numbers
verifying and recording, 3–22
Specifications
SA550, 2–5
SA600/SA800, 2–10
SA650/SA850, 2–12
SA900, 2–19
Stabilizer plates, 5–7
Storage capacities of SAxxx, 1–2
T
Technical description, 2–1
component descriptions, 2–1
SA550 storage array, 2–4
SA600 storage array, 2–8
SA650 storage array, 2–11
SA800 storage array, 2–8
SA850 storage array, 2–11
SA900 storage array, 2–15
U
Unpacking procedure
SAxxx storage array, 3–4
Unpacking Storage devices, 5–3
Upgrading an SA600/SA800 to an SA650/SA850,
5–68
authorized configurations, 5–68
overview, 5–1
precautions, 5–2
required tools, 5–2
unpacking and packing equipment, 5–3
upgrade procedures, 5–69
using a Digital-approved lifting device, 5–6
Index–2