Specifications

Index
C
Characteristics of SAxxx, 1–1
Component description
H9646 cabinet, 2–1
H9A00 cabinet, 2–1
power controller, 2–3
RA7x disk drive, 2–1
RA82 disk drive, 2–1
RA90/RA92 disk drive, 2–2
SA7x enclosure, 2–1
Configurations
RA7x, C–1
SA550, 2–5
SA600/SA800, 2–8
SA650/SA850, 2–12
SA7x, C–1
SA900, 2–15
D
Desiccant for packing, 5–6
Documentation, related, xi
E
Environmental stabilization, A–1
G
Guide rail plate assembly installation, 5–25
H
H9646 cabinet
description, 2–1
external SDI cable connections, 3–15
removing and replacing the front panel, 4–2
removing and replacing the rear panel, 4–2
H9A00 cabinet
assembling the rear panel assembly, 3–9
description, 2–1
external SDI cable connections, 3–20
I
I/O bulkhead
removing and replacing, 4–3
Installing add-on storage devices
overview, 5–1
precautions, 5–2
RA9x disk drive installed in the SA600/SA800,
5–7
RA9x disk drive installed in the SA650/SA850,
5–7
RA9x disk drive installed in the SA900, 5–30
required tools, 5–2
SA7x enclosure installed in the
SA550/SA650/SA850, 5–42
SA7x enclosure installed in the SA900, 5–56
unpacking and packing equipment, 5–3
using a Digital-approved lifting device, 5–6
Installing the SAxxx storage array
affixing the OCP label for an SA7x, 3–27
assembling the H9A00 bustle, 3–9
connecting external SDI cables, 3–15
connecting power to the SAxxx storage array,
3–27
leveling the cabinet, 3–9
required tools, 3–4
selecting line input voltage for the SA7x
enclosure, RA90/RA92 disk drive, and
ESE50 SSD, 3–24
site preparation, 3–4
unpacking procedure, 3–4
verifying and recording RA7x disk drive serial
numbers, 3–22
Installing the storage array
installing unloading ramps, 3–7
L
Left position rail installation, 5–25
Lifting device, 5–6
Line input voltage, selecting, 3–24
Index–1