Specifications

3. Connect internal SDI cables for all RA9x drives as shown on the configuration
label shown in Figure 5–47.
Figure 5–46 SA650/SA850 I/O Bulkhead
CAPTIVE
SCREW
RA9x
I/O PANEL
SA7x
I/O PANEL
SA650/SA850
I/O BULKHEAD
INTERNAL SDI
CABLE SCREW
HOLES
EXTERNAL
CABLES
CXO-2463C
SDI
CABLE
TROUGH
SA650/SA850
I/O BULKHEAD
ASSEMBLY
(REMOVED)
5.13.4 Installing the SA7x Enclosure
Use the following procedure to install the guide rail plate assembly in the SA7x
enclosure position, as shown in Figure 5–48:
Note
The spacer shown in Figure 5–48 is not used for this installation.
5–72 Storage Array Add-Ons and Upgrades