Specifications

Figure 5–17 SA900 Mounting Rail Holes
5.6.4 Right Position Guide Rail Plate Installation
Install the guide rail plate in the right position within the cabinet as follows
(refer to Figure 5–16):
WARNING
Cabinet vertical upright edges may be sharp and can slice or abrade skin
or cable insulation.
1. Turn the cabinet power off as described in Section 5.6.1.
2. This procedure installs an enclosure in add-on sequence position 2. Refer
to Figure 5–18 to select the optimum add-on sequence position for your
installation.
5–28 Storage Array Add-Ons and Upgrades